NextSDS Logo
Safety Data Sheet EN

WONDER GEL

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
WONDER GEL
Product Code
25-1700

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For use in industrial installations

Manufacturers & Suppliers

H

Hanco Ink, LLC

manufacturer

151 Stanley St., Elk Grove Village, IL 60007

Emergency Contacts

Hanco Ink, LLC

+1 847-952-1511

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

Contact may cause skin irritation.
Contact may cause eye irritation.
Contact may cause minor respiratory irritation.

Precautionary Statements

P271 Use with adequate ventilation.
Wear protective gloves/protective clothing.
Wear protective eyewear.
Avoid splashing/splattering.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
Trade Secret --- 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove subject to fresh air. If symptoms persist, seek medical attention.

Skin contact

Wash immediately with soap and water for at least 15 minutes. If symptoms persist seek medical attention.

Eye contact

Flush with copious amounts of water for at least 15 minutes while holding eyelids open. If symptoms persist, seek medical attention.

Ingestion

Seek medical attention. Do not induce vomiting.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use alcohol resistant foam, carbon dioxide, or dry chemical when fighting fires. Water or foam may cause frothing if liquid is burning but it may still be a useful extinguishing agent if carefully applied to the fire. Do not direct a water stream directly into the hot burning liquid/paste.

Specific hazards

Fire will produce dense black smoke. Exposure may cause a health hazard. May release carbon monoxide, carbon dioxide, nitrogen containing gases, hydrogen chloride, and other toxic fumes. Runoff from fire control may cause pollution.

Instructions

Do not direct a water stream directly into the hot burning liquid/paste.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains, and sewers.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains, and sewers.

Cleanup methods

Absorb with inert materials. Sweep or scrape up. Place in a container for proper disposal. Rinse affected area(s) with soap and water. Ensure runoff from cleanup is collected.

Materials: inert materials

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with the skin and eyes by wearing recommended personal protective equipment. Ensure adequate ventilation. Avoid breathing vapors, mist, or dust. Do not eat, drink, or smoke in the work area. Wash thoroughly after handling.

Storage

Keep container tightly closed and store in a cool, dry, well ventilated place. Keep out of direct sunlight. Keep away from food and drink. Open containers must be carefully resealed and kept upright. Do not store in unlabeled containers.

Hygiene

Do not eat, drink, or smoke in the work area. Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Local exhaust ventilation or other engineering controls may be required when handling or using this product to avoid overexposure. Ventilation should effectively remove and prevent the buildup of any vapor/mist/fume generated from handling this product.

Hands

Wear chemical resistant gloves. Clean and inspect gloves regularly.

Eyes

Full coverage safety glasses/goggles are recommended.

Respiratory

No protective equipment is needed under normal conditions of use. If exposure limits are exceeded or irritation is experienced, additional ventilation or respiratory protection may be required.

Skin/Body

Wear protective clothing. Clean and inspect clothing regularly.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Metal Corrosion
---
Physical State Data
liquid
Relative Density
<1.0
Odor Threshold
no data available
Density
---
Appearance
---
Evaporation Rate
no data available
Form
---
Vapor Pressure
no data available
Solubility
Insoluble in water
Freezing Point
no data available
Lower Explosive Limit
no data available
Decomposition Temperature
no data available
Flash Point
greater than 200 degrees F
Bulk Density
---
Kinematic Viscosity
no data available
Colour Intensity
---
Boiling Point
no data available
Cloud Point
---
Physical State
Loose paste
Solubility In Fat
---
State Under Standard Conditions
---
Dynamic Viscosity
no data available
Vapor Density
no data available
Colour
Light/Clear
Odor
Mild hydrocarbon
Relative Evaporation Rate
---
Auto Ignition Temperature
no data available
Flammability
no data available
Properties Status
---
Crystallisation Point
---
Melting Point
no data available
Partition Coefficient
no data available
Solubility In Water
Insoluble
Molecular Weight
---
Explosive Limits
---
Upper Explosive Limit
no data available
Ph
no data available
Voc Content
90%
Softening Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under suggested/recommended storage conditions.

Reactivity

no data available

Hazardous reactions

Will not occur under suggested/recommended storage conditions.

Avoid

When exposed to high temperatures may produce hazardous decomposition products.

Incompatible

Strong oxidizing agents.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all the requirements of all authorities with jurisdiction.

Disposal

Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
not applicable
Shipping Name
not applicable
Transport Class
not applicable
Packing Group
not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for WONDER GEL?

The signal word is warning.

What is the physical form of WONDER GEL?

WONDER GEL is a loose paste with light/clear color. It has mild hydrocarbon odor.

What is the solubility of WONDER GEL?

Insoluble in water

What is WONDER GEL used for?

For use in industrial installations

What are the hazard statements for WONDER GEL?

This substance has 3 hazard statements:

  • Contact may cause skin irritation.
  • Contact may cause eye irritation.
  • Contact may cause minor respiratory irritation.

What is the melting point of WONDER GEL?

The melting point is no data available and the boiling point is no data available.