Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Valentine Clays Bone China Casting Slip
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
To produce ceramic objects.
Manufacturers & Suppliers
Valentine Clays LTD
manufacturer
Valentine Way, Stoke on Trent, ST4 2FJ
+44 (0)1782 271200
http://www.valentineclays.co.uk
Emergency Contacts
Emergency Contact
+44 (0)1782 271200
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Quartz | 14808-60-7 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove patient to fresh air, loosen tight clothing and seek medical advice.
Wash affected areas with water
Rinse immediately with plenty of water. If irritation persists, seek medical advice.
Wash out mouth, drink plenty of water. DO NOT MAKE PATIENT VOMIT.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
This material is non-combustible and does not give off any harmful gases when involved with fires and will not react with other materials or fire extinguishing media.
None known.
None known.
Firefighter Protection
Employ protective equipment commonly used in the event of a fire
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special environmental precautions required.
Spillages of slop material should be removed with copious amounts of water to factory drainage system. Spillages of semi-dry or dry product should be removed by sweeping, preferably vacuum methods.
Materials: water, vacuum
Related Products
Similar products with comparable safety profiles
Transparent Leadless Stoneware Glaze
---
Transparent Leadless Stoneware Glaze
---
Transparent Leadless Stoneware Glaze
---
Transparent Leadless Stoneware Glaze
---
Transparent Matte Leadless Stoneware Glaze
---
Leadless Zircon Opaque Satin Matte Stoneware Glaze
---
Fundamentals Underglazes
---
White Pottery Clay Body-Moist
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Spillage should be prevented during transfer operations and precautions taken to prevent splashing to body and eyes. When handling all materials observe good standards of industrial hygiene. Avoid swallowing, inhaling dust and eye/skin contact through the use of personal protective equipment. When dry material has to be handled, dust masks with normal protection factor (NPF) of 10 (EN149) should be worn. When using do not eat, drink or smoke. Wash hands before breaks and after work. Do not leave children unattended whilst using the product.
Keep packaging tightly closed. Slop material should be agitated during storage to prevent settling. Keep out of reach of children.
When using do not eat, drink or smoke. Wash hands before breaks and after work.
No special measure required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Dry materials should be used under conditions of local exhaust ventilation to avoid inhalation of dust.
gloves if skin irritation is likely.
Goggles may be used to prevent possible eye irritation
Where it is not possible, an appropriate dust mask must be worn.
suitable protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The material is extremely inert and resistant to decomposition. Large aquatic discharges may cause localized physical effects such as silting.
12.2 Persistence and degradability
12.3 Bio accumulative potential
12.4 Mobility in soil
12.5 Other adverse effects
No further relevant information available
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Material should be treated as industrial waste and the procedures laid down in the Duty of Care- Environmental Protection Act observed.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Classification for Supply: Slop Material- Warning, Pugged/ Press Cake Clay- Warning, Semi- Dry Material- Warning, Dry Material- Warning
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Valentine Clays Bone China Casting Slip?
The signal word is warning.
What is the physical form of Valentine Clays Bone China Casting Slip?
Valentine Clays Bone China Casting Slip is a liquid (thixotropic) appearing as white (colours vary as plugged or pressed plastic clay body, or as a dry powder) with white (colours vary as plugged or pressed plastic clay body, or as a dry powder) color. It has almost odourless odor.
What is the solubility of Valentine Clays Bone China Casting Slip?
Water Dispersible
What is Valentine Clays Bone China Casting Slip used for?
To produce ceramic objects.
What are the hazard statements for Valentine Clays Bone China Casting Slip?
This substance has 1 hazard statement:
- H373: May cause damage to lungs through prolonged or repeated exposure by inhalation.
What is the melting point of Valentine Clays Bone China Casting Slip?
The melting point is Not applicable and the boiling point is Not applicable.