NextSDS Logo
Safety Data Sheet EN

Leadless Zircon Opaque Satin Matte Stoneware Glaze

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Leadless Zircon Opaque Satin Matte Stoneware Glaze
Product Code
P2057

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

P

Potterycrafts Ltd.

distributor

Campbell Road, Stoke, Stoke-on-Trent, ST4 4ET

44 (0)1782 745000

Emergency Contacts

Emergency Contact

+44(0)1785 745000

Mon-Friday 08:45 – 16:30 hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Not Classified
STOT RE Cat. 2 H372
Not Classified

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H372 Causes damage to organs through prolonged or repeated exposure.

Precautionary Statements

P260 Do not breathe vapour/spray.
P314 Get medical advice/attention if you feel unwell.
P501 Dispose of contents/container in accordance with national regulations

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Frits, Chemicals Group 1 EC: 266-047-6 65997-18-4 60 - 70% No
silica EC: 238-878-4 14808-60-7 10 - 30% Yes

Notes

The Full Text for all R-Phrases and Hazard Statements are displayed in Section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move affected person to fresh air at once. Get medical attention if any discomfort continues.

Skin contact

Wash skin thoroughly with soap and water. Get medical attention if irritation persists after washing.

Eye contact

Rinse with water. Get medical attention if any discomfort continues.

Ingestion

Do not induce vomiting. Give a few small glasses of water or milk to drink. Never give anything by mouth to an unconscious person. Get medical attention if any discomfort continues.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use fire-extinguishing media suitable for the surrounding fire.

Specific hazards

No unusual fire or explosion hazards noted.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Avoid spreading dust or contaminated materials.

Cleanup methods

Remove spillage with vacuum cleaner. If not possible, collect spillage with shovel, broom or the like.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not eat, drink or smoke when using the product. Good personal hygiene procedures should be implemented. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site.

Storage

Keep container dry.

Hygiene

Do not eat, drink or smoke when using the product. Good personal hygiene procedures should be implemented. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate general and local exhaust ventilation. Observe any occupational exposure limits for the product or ingredients

Hands

Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible.

Eyes

Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. The following protection should be worn: Dust-resistant, chemical splash goggles.

Respiratory

No specific recommendations. Protection against nuisance dust must be used when the airborne concentration exceeds 10 mg/m³.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Ph
Not determined.
Solidification Point
---
Freezing Point
---
Solubility In Fat
---
Upper Explosive Limit
---
Partition Coefficient
---
Vapor Pressure
---
Density
---
Decomposition Temperature
---
Boiling Point
---
Metal Corrosion
---
Softening Point
---
Kinematic Viscosity
---
Properties Status
---
Molecular Weight
---
Physical State
solid
Solubility
Insoluble in water.
Physical State Data
solid
Dynamic Viscosity
---
Vapor Density
Not relevant.
Flash Point
Not applicable.
Bulk Density
---
Explosive Limits
---
Evaporation Rate
Not applicable.
Odor Threshold
---
Flammability
---
Lower Explosive Limit
---
State Under Standard Conditions
---
Cloud Point
---
Form
---
Colour Intensity
---
Appearance
Dusty white powder.
Melting Point
---
Voc Content
---
Odor
Odourless.
Relative Density
---
Relative Evaporation Rate
---
Colour
---
Solubility In Water
Insoluble in water.
Crystallisation Point
---
Auto Ignition Temperature
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal ambient temperatures and when used as recommended.

Hazardous reactions

Not relevant

Avoid

Not known.

Incompatible

No specific material or group of materials is likely to react with the product to produce a hazardous situation.

Decomposition

Not known

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

12.2. Persistence and degradability

Persistence and degradability No information available as to the persistence and degradability of this product.

No information available as to the persistence and degradability of this product.

12.3. Bioaccumulative potential

Bioaccumulative potential Not available.

Not available.

12.4. Mobility in soil

Mobility Not available.

Mobility data is not available.

12.5. Results of PBT and vPvB assessment

Results of PBT and vPvB assessment Not available

Not available

12.6. Other adverse effects

Other adverse effects Not available.

Not available.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Safety, health and environmental regulations/legislation specific for the substance or mixture

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Leadless Zircon Opaque Satin Matte Stoneware Glaze?

The signal word is warning.

What is the physical form of Leadless Zircon Opaque Satin Matte Stoneware Glaze?

Leadless Zircon Opaque Satin Matte Stoneware Glaze is a solid appearing as dusty white powder. . It has odourless. odor.

What is the solubility of Leadless Zircon Opaque Satin Matte Stoneware Glaze?

Insoluble in water.

What are the hazard statements for Leadless Zircon Opaque Satin Matte Stoneware Glaze?

This substance has 1 hazard statement:

  • H372: Causes damage to organs through prolonged or repeated exposure.