NextSDS Logo
Safety Data Sheet EN

Lithium Ore (Petalite)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Lithium Ore (Petalite)
Product Form
fine powder
Product Code
182
Chemical Name
Lithium Ore (Petalite)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

checking the accuracy of assay methods

Manufacturers & Suppliers

National Institute of Standards and Technology logo

National Institute of Standards and Technology

manufacturer

100 Bureau Drive, Stop 2300, Gaithersburg, Maryland 20899-2300

301-975-2200

http://www.nist.gov/srm

Emergency Contacts

ChemTrec

1-800-424-9300

ChemTrec

+1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified
Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Lithium Ore (Petalite); Lithium aluminum silicate

Chemical Name CAS Number Concentration Hazardous
Petalite EC: 215-104-3 1302-66-5 100% Yes

Notes

Components are listed in compliance with OSHA's 29 CFR 1910.1200; for the actual values see the Certificate of Analysis.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If adverse effects occur, remove to uncontaminated area. If not breathing, give artificial respiration or oxygen by qualified personnel. Seek immediate medical attention.

Skin contact

Wash skin with soap and water for at least 15 minutes. Thoroughly clean and dry contaminated clothing before reuse.

Eye contact

Flush eyes with water for at least 15 minutes. If necessary, seek medical attention.

Ingestion

If adverse effects occur after ingestion, seek medical treatment.

Immediate Medical Attention

Seek immediate medical attention (inhalation), seek medical attention if needed (general).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing agents appropriate for surrounding fire.

Unsuitable media

None listed.

Specific hazards

Negligible fire hazard. Avoid generating dust.

Instructions

Avoid inhalation of material or combustion byproducts.

Firefighter Protection

Wear full protective clothing and NIOSH approved self-contained breathing apparatus (SCBA).

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Any accumulated material on surfaces should be removed and properly disposed of.

Cleanup methods

Collect spilled material in appropriate container for disposal.

Materials: appropriate container

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Minimize dust generation and accumulation on surfaces. See Section 8, “Exposure Controls and Personal Protection”.

Storage

Store and handle in accordance with all current regulations and standards.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide local exhaust or process enclosure ventilation system. Ensure compliance with applicable exposure limits.

Hands

Chemical-resistant gloves should be worn at all times when handling chemicals.

Eyes

Wear splash resistant safety goggles with a face shield.

Respiratory

If workplace conditions warrant a respirator, a respiratory protection program that meets OSHA 29CFR 1910.134 must be followed. Refer to NIOSH 42 CFR 84 for applicable certified respirators.

Skin/Body

Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flammability
not available
Boiling Point
not available
Evaporation Rate
not available
Voc Content
---
Upper Explosive Limit
not available
Physical State
colorless to white, fine crystalline powder
Vapor Pressure
not available
Relative Evaporation Rate
---
Solubility In Water
soluble in water
Flash Point
not available
Solidification Point
---
Odor
not available
Ph
not available
Lower Explosive Limit
not available
Appearance
colorless to white, fine crystalline powder
Melting Point
not available
Dynamic Viscosity
not available
State Under Standard Conditions
---
Decomposition Temperature
not available
Properties Status
---
Physical State Data
solid
Kinematic Viscosity
---
Freezing Point
not available
Molecular Weight
310.29 g/mol
Solubility In Fat
---
Partition Coefficient
not available
Auto Ignition Temperature
not available
Explosive Limits
---
Odor Threshold
not available
Solubility
soluble in water
Colour Intensity
---
Cloud Point
---
Bulk Density
---
Form
fine crystalline powder
Crystallisation Point
---
Metal Corrosion
---
Relative Density
---
Vapor Density
not available
Softening Point
---
Colour
colorless to white
Density
2.4 g/cm³
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Reactivity

Stable at normal temperatures and pressure.

Hazardous reactions

None listed.

Avoid

Avoid generating dust.

Incompatible

No data available.

Decomposition

Thermal decomposition will produce miscellaneous decomposition products.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose of waste in accordance with all applicable federal, state, and local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Lithium Ore (Petalite)?

The signal word is no signal word.

What is the physical form of Lithium Ore (Petalite)?

Lithium Ore (Petalite) is a colorless to white, fine crystalline powder appearing as colorless to white, fine crystalline powder with colorless to white color. It has not available odor.

What is the solubility of Lithium Ore (Petalite)?

soluble in water

What is Lithium Ore (Petalite) used for?

checking the accuracy of assay methods

What is the melting point of Lithium Ore (Petalite)?

The melting point is not available and the boiling point is not available.