Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SEAL & BOND SPRAY
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable (mixture)
Identified Uses
Adhesive
Uses advised against
No uses advised against known
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| trimethoxyvinylsilane EC: 220-449-8 | 2768-02-7 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove vicm into fresh air. In case of respiratory problems, consult a doctor/medical service.
Symptoms: No effects known.
If possible, wipe up/dry remove chemical. Then rinse/shower immediately with (lukewarm) water. If irritaon persists, consult a doctor/medical service.
Symptoms: No effects known.
Rinse immediately with (lukewarm) water. Remove contact lenses, if present and easy to do. Connue rinsing. If irritaon persists, consult a doctor/medical service.
Symptoms: No effects known.
Rinse mouth with water. If you feel unwell, consult a doctor/medical service. Do not wait for symptoms to occur to consult Poison Center.
Symptoms: No effects known.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Small fire: Quick-acting ABC powder extinguisher, Class A foam extinguisher, Water (quick-acting extinguisher, reel). Major fire: Water, Class A foam.
Small fire: Quick-acting BC powder extinguisher, Quick-acting CO2 extinguisher.
In case of fire: possible release of toxic/corrosive gases/vapours.
No specific fire-fighng instrucons required.
Firefighter Protection
Gloves (EN 374). Protecve clothing (EN 14605 or EN 13034). Heat/fire exposure: self-contained breathing apparatus (EN 136 + EN 137).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain released product.
Scoop solid spill into closing containers. Clean contaminated surfaces with an excess of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from naked flames/heat. Observe strict hygiene. Keep container tightly closed.
Meet the legal requirements. Store in a cool area. Store in a dry area. Keep container in a well-ventilated place.
Observe strict hygiene.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protecve gloves against chemicals (EN 374). Materials: nitrile rubber (> 120 minutes, ≥ 0.4 mm, Class 4), natural rubber (> 120 minutes, ≥ 0.4 mm, Class 4), PVA (> 120 minutes, ≥ 0.4 mm, Class 4).
Safety glasses (EN 166).
Respiratory protecon not required in normal condions.
Protecve clothing (EN 14605 or EN 13034).
See secons 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available.
No data available.
No data available.
No data available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SEAL & BOND SPRAY?
The signal word is no signal word.
What is the physical form of SEAL & BOND SPRAY?
SEAL & BOND SPRAY is a paste with variable in colour,dependingon the composion color. It has characterisc odour odor.
What is the solubility of SEAL & BOND SPRAY?
Water;insoluble
What is SEAL & BOND SPRAY used for?
Adhesive
What is the melting point of SEAL & BOND SPRAY?
The melting point is No data available in the literature and the boiling point is No data available in the literature.