NextSDS Logo
Safety Data Sheet EN

Miele ProCare Dent 10 A

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Miele ProCare Dent 10 A

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Washing and cleaning products (including solvent based products)

Manufacturers & Suppliers

Miele & Cie. KG logo

Miele & Cie. KG

manufacturer

Carl-Miele-Straße 29, D-33332 Gütersloh

+49 5241 89 0

http://www.miele-professional.com

Emergency Contacts

GBK/ Infotrac

1 800 535 5053

GBK/ Infotrac

+1 352 323 3500

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318
Met. Corr. Cat. 1 H290

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
disodium metasilicate EC: 229-912-9 6834-92-0 10 - 25% Yes
dipotassium metasilicate EC: 233-001-1 10006-28-7 10 - 25% Yes
potassium hydroxide EC: 215-181-3 1310-58-3 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Ensure supply of fresh air. When spray fog inhaled, seek medical aid.

Skin contact

After contact with skin, wash immediately with plenty of water. Take medical treatment.

Eye contact

In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Summon a doctor immediately.

Ingestion

If swallowed, seek medical advice immediately and show this container or label. Rinse mouth thoroughly with water. Let plenty of water be drunk in small gulps. Do not induce vomiting.

Immediate Medical Attention

In the case of swallowing with subsequent vomiting, aspiration of the lungs can occur which can lead to chemical pneumonia or asphyxiation.

Medical Treatment

In the case of swallowing with subsequent vomiting, aspiration of the lungs can occur which can lead to chemical pneumonia or asphyxiation.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Chemical resistant gloves. Appropriate Material: neoprene, butyl rubber, nitrile.

Eyes

Safety glasses with side protection shield

Respiratory

If workplace limits are exceeded, a respiratory protection approved for this particular job must be worn.

Skin/Body

Clothing as usual in the chemical industry. Protective shoes

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
colourless
Colour Intensity
---
Form
liquid
Odor
characteristic
Odor Threshold
not determined
Ph
appr. 14
Melting Point
not determined
Boiling Point
not determined
Flash Point
Not applicable
Freezing Point
not determined
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
not determined
Vapor Pressure
not determined
Vapor Density
not determined
Relative Density
---
Bulk Density
---
Density
1,48 g/cm3
Flammability
not determined
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
not determined
Decomposition Temperature
not determined
Solubility
not determined
Partition Coefficient
not determined
Solubility In Water
not determined
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 1719
Shipping Name
CAUSTIC ALKALI LIQUID, N.O.S. (disodium metasilicate, dipotassium metasilicate)
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Miele ProCare Dent 10 A?

The signal word is danger.

What is the physical form of Miele ProCare Dent 10 A?

Miele ProCare Dent 10 A is a liquid with colourless color. It has characteristic odor.

What is the solubility of Miele ProCare Dent 10 A?

not determined

What is Miele ProCare Dent 10 A used for?

Washing and cleaning products (including solvent based products)

What are the hazard statements for Miele ProCare Dent 10 A?

This substance has 2 hazard statements:

  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of Miele ProCare Dent 10 A?

The melting point is not determined and the boiling point is not determined.