Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- neodisher MediClean forte
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Washing and cleaning products (including solvent based products)
Manufacturers & Suppliers
Chemische Fabrik Dr. Weigert GmbH & Co. KG
manufacturer
Mühlenhagen 85, D-20539 Hamburg
+49 40 789 60 0
http://www.drweigert.com
Emergency Contacts
GBK/ Infotrac
1 800 535 5053
GBK/ Infotrac
+1 352 323 3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| fatty alcohols, alkoxylated | 120313-48-6 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air. In the event of symptoms take medical treatment.
In case of contact with skin wash off with warm water. Consult a doctor if skin irritation persists.
Separate eyelids, wash the eyes thoroughly with water (15 min.). In case of irritation consult an oculist.
Rinse out mouth and give plenty of water to drink.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product itself is non-combustible; adapt fire extinguishing measures to surrounding areas.
In case of combustion evolution of dangerous gases possible.
Firefighter Protection
In case of combustion use a suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin, eyes and clothing.
Do not allow to enter drains or waterways.
Clean contaminated floors and objects thoroughly, observing environmental regulations.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store product in closed containers. Keep container tightly closed and dry.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant gloves. Permanent hand contact: neoprene (>= 0,65 mm, > 480 min), nitrile (>= 0,4 mm, > 480 min), butyl (>= 0,7 mm, > 480 min). Short-term hand contact: nitrile (>= 0,11 mm).
Safety glasses with side protection shield
Not necessary, but do not inhale vapours. If workplace limits are exceeded, a respiratory protection approved for this particular job must be worn.
Clothing as usual in the chemical industry.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No hazardous reactions known.
No hazardous reactions when stored and handled according to prescribed instructions.
No hazardous reactions known.
No hazardous reactions known.
None known
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Allocation of a waste code number, according to the European Waste Catalogue (EWC), should be carried out in agreement with the regional waste disposal company.
Allocation of a waste code number, according to the European Waste Catalogue (EWC), should be carried out in agreement with the regional waste disposal company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product does not contain substances of very high concern (SVHC).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for neodisher MediClean forte?
The signal word is no signal word.
What is the physical form of neodisher MediClean forte?
neodisher MediClean forte is a liquid with yellow to brownish color. It has characteristic odor.
What is the solubility of neodisher MediClean forte?
not determined
What is neodisher MediClean forte used for?
Washing and cleaning products (including solvent based products)
What is the melting point of neodisher MediClean forte?
The melting point is not determined and the boiling point is not determined.