Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
35U ACRYLIC URETHANE SERIES is a liquid. substance commonly used 2 part polyurethane coating.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H225: Highly flammable liquid and vapor.
- H302: Harmful if swallowed.
- H304: May be fatal if swallowed and enters airways.
- H312: Harmful in contact with skin.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H351: Suspected of causing cancer.
- May damage fertility or the unborn child.
- Causes damage to organs through prolonged or repeated exposure.
- H402: Harmful to aquatic life.
- H413: May cause long lasting harmful effects to aquatic life.
Precautionary Statements
- Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe mist/vapors. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection.
- If swallowed: Immediately call a poison center/doctor. Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. In case of fire: Use appropriate media to extinguish.
- Store in a well-ventilated place. Keep cool. Store locked up.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
FORREST Paint Co. DBA
manufacturer
1011 Mckinley Street P.O. Box 22110 Eugene, OR 97402 United States
US
1 (541) 342-1821
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
CHEMTREC
1 (800) 424-9300
US
Contract # 8730
CHEMTREC
+1 703-527-3887
US
Contract # 8730
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-PROPANOL, 1-METHOXY-,ACET ATE | 108-65-6 | 10-25% | ✓ Non-hazardous |
| ISOBUTYL ACETATE | 110-19-0 | 35% | ✓ Non-hazardous |
| TITANIUM DIOXIDE | 13463-67-7 | 35% | ✓ Non-hazardous |
| IRON OXIDE | 1309-37-1 | 25% | ✓ Non-hazardous |
| TALC | 14807-96-6 | 25% | ✓ Non-hazardous |
| TOLUENE | 108-88-3 | 25% | ✓ Non-hazardous |
| ETHYL BENZENE | 100-41-4 | 1-10% | ✓ Non-hazardous |
| SOLVENT NAPHTHA LIGHT ALIPHATIC | 64742-89-8 | 1-10% | ✓ Non-hazardous |
| ALUMINUM | 7429-90-5 | 10% | ✓ Non-hazardous |
| C.I. PIGMENT BLUE 15 | 147-14-8 | 10% | ✓ Non-hazardous |
| C.I. PIGMENT GREEN 7 | 1328-53-6 | 10% | ✓ Non-hazardous |
| C.I. PIGMENT RED 52:2 | 12238-31-2 | 10% | ✓ Non-hazardous |
| XYLENE | 1330-20-7 | 10% | ✓ Non-hazardous |
| CARBON BLACK | 1333-86-4 | 2.5% | ✓ Non-hazardous |
| MANGANESE | 7439-96-5 | 1% | ✓ Non-hazardous |
| Other components below reportable levels | N/A | 1-10% | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move to fresh air. Call a physician if symptoms develop or persist.
🖐️ Skin Contact
Take off immediately all contaminated clothing. Rinse skin with water/shower. Get medical advice/attention if you feel unwell. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Symptoms:
Skin irritation. May cause redness and pain.
👁️ Eye Contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Symptoms:
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision.
🍽️ Ingestion/Swallowing
Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Symptoms:
Aspiration may cause pulmonary edema and pneumonitis. Headache.
🚨 Immediate Medical Attention Required
Call an ambulance. Continue flushing during transport to hospital. Keep victim under observation. Symptoms may be delayed. IF exposed or concerned: Get medical advice/attention. If you feel unwell, seek medical advice (show the label where possible). Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. Show this safety data sheet to the doctor in attendance.
Medical Treatment
Provide general supportive measures and treat symptomatically. Thermal burns: Flush with water immediately. While flushing, remove clothes which do not adhere to affected area. Call an ambulance. Continue flushing during transport to hospital. Keep victim warm. Keep victim under observation.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Explosion-proof general and local exhaust ventilation. Good general ventilation should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Provide eyewash station and safety shower.
🧤 Hand Protection
Wear appropriate chemical resistant gloves.
👁️ Eye Protection
Chemical respirator with organic vapor cartridge and full facepiece.
😷 Respiratory Protection
Chemical respirator with organic vapor cartridge and full facepiece.
🦺 Skin/Body Protection
Wear appropriate chemical resistant clothing. Use of an impervious apron is recommended.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1263
📦 Proper Shipping Name
Paint
⚠️ Transport Hazard Class
3
📋 Packing Group
II
🚢 IMDG Maritime Transport Precautions
Read safety instructions, SDS and emergency procedures before handling.
✈️ IATA Air Transport Precautions
Read safety instructions, SDS and emergency procedures before handling.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for 35U ACRYLIC URETHANE SERIES?
The signal word for this substance is "danger".
What is the physical form of 35U ACRYLIC URETHANE SERIES?
35U ACRYLIC URETHANE SERIES is a liquid. appearing as liquid. with various. color. It has solvent. odor.
What is 35U ACRYLIC URETHANE SERIES used for?
2 Part polyurethane coating
What are the hazard statements for 35U ACRYLIC URETHANE SERIES?
This substance has 11 hazard statements: H225: Highly flammable liquid and vapor. H302: Harmful if swallowed. H304: May be fatal if swallowed and enters airways. H312: Harmful in contact with skin. H315: Causes skin irritation. H319: Causes serious eye irritation. H351: Suspected of causing cancer. May damage fertility or the unborn child. Causes damage to organs through prolonged or repeated exposure. H402: Harmful to aquatic life. H413: May cause long lasting harmful effects to aquatic life.
What is the melting point of 35U ACRYLIC URETHANE SERIES?
The melting point is Not available. and the boiling point is Not available..