Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ULTRAMID® A3WG6 LS BLACK 23189 POLYAMIDE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polymer, for industrial processing only
Manufacturers & Suppliers
BASF SE
manufacturer
67056 Ludwigshafen, GERMANY
+49 621 60-0
Emergency Contacts
International emergency number
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Preparation based on: polyamide, polyamide (PA 66), additives, fillers
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| polyamide | --- | --- | No |
| polyamide (PA 66) | --- | --- | No |
| additives | --- | --- | No |
| fillers | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If difficulties occur after dust has been inhaled, remove to fresh air and seek medical attention.
Burns caused by molten material require hospital treatment.
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. If irritation develops, seek medical attention.
Rinse mouth and then drink 200-300 ml of water. If difficulties occur: Seek medical attention.
Medical Treatment
Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, foam, dry powder
water jet
Traces of the substances/groups of substances mentioned can be released in case of fire. Under special fire conditions traces of other toxic substances are possible. Formation of further decomposition and oxidation products depends upon the fire conditions.
Keep adjacent fire-exposed buildings, equipment, and materials cool with water spray.
Firefighter Protection
Wear a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special precautions necessary.
Pick up with suitable appliance and dispose of.
Pick up with suitable appliance and dispose of.
No special precautions necessary.
Sweep/shovel up.
Related Products
Similar products with comparable safety profiles
ULTRAMID® 1021HS BLACK POLYAMIDE
---
ULTRAMID® C 52G4 MZ25 WHITE R9003 POLYAMIDE
---
ULTRAMID® B3EG3 UNCOLORED POLYAMIDE
---
ULTRADUR® B4330G6 HR BLACK 15045 POLYBUTYLENE TEREPHTHALATE
---
ULTRADUR® B 4300 G6 BK Q16 15007 POLYBUTYLENE TEREPHTHALATE
---
Ultramid® B36 LN
CAS: 25038-54-4
DURASYN® 136 POLYALPHAOLEFIN
CAS: 157707-86-3
DURASYN® 170 POLYALPHAOLEFIN
CAS: 68037-01-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of dusts/mists/vapours.
Keep container tightly closed and dry; store in a cool place.
Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation.
Use additional heat protection gloves when handling hot molten masses (EN 407), e.g. of textile or leather.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Breathing protection if breathable aerosols/dust are formed. Wear respiratory protection if ventilation is inadequate. (Particle filter EN 143 P2 or FFP2)
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated. The product is chemically stable.
No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: No corrosive effect on metal.
No hazardous reactions known.
Temperature: > 320 °C. See SDS section 7 - Handling and storage.
No substances known that should be avoided.
Ammonia, aqueous solution, Carbon monoxide, Carbon dioxide, Cyclopentanone, Hydrogen cyanide amines, nitriles
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Check for possible recycling. Incinerate in suitable incineration plant, observing local authority regulations.
Check for possible recycling. Incinerate in suitable incineration plant, observing local authority regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulation on Registration, Evaluation, Authorisation and Restriction of Chemicals (EU)
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ULTRAMID® A3WG6 LS BLACK 23189 POLYAMIDE?
The signal word is no signal word.
What is the physical form of ULTRAMID® A3WG6 LS BLACK 23189 POLYAMIDE?
ULTRAMID® A3WG6 LS BLACK 23189 POLYAMIDE is a solid appearing as granules with various, depending on the colourant color. It has odourless odor.
What is the solubility of ULTRAMID® A3WG6 LS BLACK 23189 POLYAMIDE?
insoluble (20 ℃, 1.013 hPa)
What is ULTRAMID® A3WG6 LS BLACK 23189 POLYAMIDE used for?
Polymer, for industrial processing only
What is the melting point of ULTRAMID® A3WG6 LS BLACK 23189 POLYAMIDE?
The melting point is approx. 260 °C and the boiling point is The substance / product decomposes therefore not determined..