Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GERMICIDAL BOWL CLEANSE
- Product Code
- 7120, 7102
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Disinfectant
Uses advised against
For Industrial and Institutional Use Only
Manufacturers & Suppliers
Spartan Chemical Company, Inc.
manufacturer
1110 Spartan Drive, Maumee, Ohio 43537 USA
800-537-8990
http://www.spartanchemical.com
Emergency Contacts
Medical Emergency/Information
888-314-6171
CHEMTREC
800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing. IMMEDIATELY CALL A POISON CENTER OR PHYSICIAN.
Take off immediately all contaminated clothing and shoes. Rinse with water or shower for at least 15 minutes. IMMEDIATELY CALL A POISON CENTER OR PHYSICIAN. Wash contaminated clothing before reuse.
Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IMMEDIATELY CALL A POISON CENTER OR PHYSICIAN.
Rinse mouth. Do NOT induce vomiting. IMMEDIATELY CALL A POISON CENTER OR PHYSICIAN. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
IMMEDIATELY CALL A POISON CENTER OR PHYSICIAN.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good general ventilation. If work practices generate dust, fumes, gas, vapors or mists which expose workers to chemicals above the occupational exposure limits, local exhaust ventilation or other engineering controls should be considered. Eye wash stations and shower facilities should be readily accessible in areas where the product is handled.
Wear rubber or other chemical-resistant gloves.
Wear splash goggles.
Not required with expected use. If occupational exposure limits are exceeded or respiratory irritation occurs, use of a NIOSH/MSHA approved respirator suitable for the use-conditions and chemicals in Section 3 should be considered.
Use of impervious apron, boots and other protective equipment should be considered in order to prevent or minimize contact with this product.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1760
- Shipping Name
- Corrosive liquids, n.o.s., (contains hydrochloric (muriatic) acid)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GERMICIDAL BOWL CLEANSE?
The signal word is danger.
What is the physical form of GERMICIDAL BOWL CLEANSE?
GERMICIDAL BOWL CLEANSE is a liquid appearing as liquid with white color. It has unpleasant odor.
What is the solubility of GERMICIDAL BOWL CLEANSE?
Soluble in water
What is GERMICIDAL BOWL CLEANSE used for?
Disinfectant
What are the hazard statements for GERMICIDAL BOWL CLEANSE?
This substance has 4 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and serious eye damage.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation
What is the melting point of GERMICIDAL BOWL CLEANSE?
The melting point is No information available. and the boiling point is 104 ℃ / 219 ºF.