Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CELLCLEAN
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For in-vitro diagnosis
Uses advised against
No data available.
Manufacturers & Suppliers
SYSMEX LTD
national supplier
Sysmex House, Garamonde Drive, Wymbush, Milton Keynes, Buckinghamshire, United Kingdom, MK8 8DF
+44 (0)333 320 3460
Emergency Contacts
Giftinformationszentrum Nord
+49 (0)551 192 40
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sodium hypochlorite, solution EC: 231-668-3 | 7681-52-9 | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove affected person from the immediate area. Ensure supply of fresh air.
Wash off immediately with soap and water.
Separate eyelids, wash the eyes thoroughly with water (15 min.). Call a doctor immediately.
Call a doctor immediately. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Call a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product itself is non-combustible; adapt fire extinguishing measures to surrounding areas.
No data available.
In the event of fire, the following can be released: Carbon dioxide (CO2); Carbon monoxide (CO); Chlorine (Cl2)
Firefighter Protection
Use self-contained breathing apparatus. Wear protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to protective measures listed in sections 7 and 8. Ensure adequate ventilation. Avoid contact with skin, eyes and clothing.
Do not discharge into the drains/surface waters/groundwater. Do not discharge into the subsoil/soil.
Take up with absorbent material
Materials: sand, kieselguhr, universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Risks inherent to handling the product must be minimised by applying the appropriate protective and preventive measures. Working processes should - so far as possible, according to the state of the art - be designed to rule out bodily contact or the release of hazardous substances. Do not inhale vapours. Avoid contact with eyes and skin. Remove soiled or soaked clothing immediately.
Keep container tightly closed in a cool, well-ventilated place. Protect from light. Containers which are opened must be carefully closed and kept upright to prevent leakage.
Do not eat, drink or smoke during work time. Keep away from food, drink and animal feeding stuffs. Wash hands and skin before breaks and after work. Provide eye wash fountain in work area. Have emergency shower available.
No special measures necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk of skin contact with the product. Before use, the protective gloves should be tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer's instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves.
Safety glasses with side protection shield (EN 166); Face shield
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of aerosol and mist formation, take appropriate measures for breathing protection in the event workplace threshold values are not specified.
Normal chemical work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions (See section 7).
Dangerous reactions are not expected if the product is handled according to its intended use.
None, when used as directed.
None, if handled according to intended use.
Acids; Ammonia; Reducing agents
Chlorine
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No data available.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
No data available for PBT or vPvB assessment.
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company.
Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1791
- Shipping Name
- HYPOCHLORITE SOLUTION
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is subject to REACH regulation (EC) 1907/2006 annex XVII. The product is subject to Part I of Annex I of Directive 2012/18/EU, risk category E1.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CELLCLEAN?
The signal word is danger.
What is the physical form of CELLCLEAN?
CELLCLEAN is a liquid with chartreuse color. It has slightly pungent odor.
What is CELLCLEAN used for?
For in-vitro diagnosis
What are the hazard statements for CELLCLEAN?
This substance has 2 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H410: Very toxic to aquatic life with long lasting effects.