NextSDS Logo
LO

LOCTITE 271 THREADLOCKER HIGH STRENGTH

WARNING Liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
LOCTITE 271 THREADLOCKER HIGH STRENGTH
Product Code
27121

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Anaerobic Sealant
Uses Advised Against
None identified

Overview

LOCTITE 271 THREADLOCKER HIGH STRENGTH commonly used anaerobic sealant.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

warning (WARNING:)

Hazard Classifications

Skin Irr. Category 2 H315
Eye Irrit. Category 2A H319
STOT RE Category 2 H373

GHS Hazard Pictograms & Safety Symbols

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS08 GHS Hazard Pictogram: Serious health hazard - Carcinogenic, mutagenic, or toxic to organs

GHS08

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H315: CAUSES SKIN IRRITATION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

  • P260: Do not breathe vapors, mist, or spray.
  • P264: Wash affected area thoroughly after handling.
  • P280: Wear protective gloves, eye protection, and face protection.
  • P302+P352: IF ON SKIN: Wash with plenty of water.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P314: Get medical attention if you feel unwell.
  • P332+P313: If skin irritation occurs: Get medical attention.
  • P337+P313: If eye irritation persists: Get medical attention.
  • P362+P364: Take off contaminated clothing and wash it before reuse.
  • P501: Dispose of contents and/or container according to Federal, State/Provincial and local Not prescribed governmental regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Henkel Corporation company logo - Safety Data Sheet supplier organization

Henkel Corporation

manufacturer

📍

One Henkel Way Rocky Hill, Connecticut 06067

🌍

US

📞

+1 (860) 571-5100

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Poison Control Center

📞

1-877-671-4608

🌍

US

💡

toll free

Poison Control Center

📞

1-303-592-1711

🌍

US

CHEMTREC

📞

1-800-424-9300

🌍

US

💡

toll free

CHEMTREC

📞

1-703-527-3887

🌍

US

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Cumene hydroperoxide 80-15-9 1-5% ⚠️ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

🖐️ Skin Contact

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.

👁️ Eye Contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

🍽️ Ingestion/Swallowing

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.

🚨 Immediate Medical Attention Required

Not available.

Medical Treatment

Not available.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

🧪 Physical State
Liquid
Critical Property
📊 Physical State Data
liquid
📊 State Under Standard Conditions
Not available
👁️ Appearance
Not available
🎨 Colour
Red
📊 Colour Intensity
Not available
📊 Form
Not available
👃 Odor
Mild
📊 Odor Threshold
Not available.
🧪 Ph
Not applicable, Product is non-polar/aprotic.
🧊 Melting Point
Not applicable, Product is a liquid
Critical Property
💨 Boiling Point
> 150 °℃ (> 302°F)
Critical Property
🔥 Flash Point
> 100 °℃ (> 212°F) Tagliabue closed cup145 ℃ (293ºF) Cleveland open cup
Critical Property
📊 Freezing Point
Not available
📊 Softening Point
Not available
📊 Solidification Point
Not available
📊 Cloud Point
Not available
📊 Crystallisation Point
Not available
📊 Relative Evaporation Rate
Not available
💨 Evaporation Rate
Not available.
💨 Vapor Pressure
< 5 mm hg (26.7 ℃ (80.1 ºF)) < 6.5 mbar (27 ℃ (80.6 °F)) < 0.13 mbar (20 ℃ (68ºF))
📊 Vapor Density
Not available
📊 Relative Density
1.1
📊 Bulk Density
Not available
⚖️ Density
1.1
Critical Property
🔥 Flammability
The product is not flammable.
📊 Upper Explosive Limit
Not available.
📊 Lower Explosive Limit
Not available.
📊 Explosive Limits
Not available
📊 Auto Ignition Temperature
Not available.
📊 Decomposition Temperature
Not available.
💧 Solubility
Slight Water
📊 Partition Coefficient
Not available.
📊 Solubility In Water
Not available
📊 Solubility In Fat
Not available
📊 Molecular Weight
Not available
📊 Voc Content
0.82 %; 7.81 g/l
📊 Metal Corrosion
Not available
📊 Dynamic Viscosity
400 - 600 mPa.s
📊 Kinematic Viscosity
> 20.5 mm2/s
📊 Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits.

🧤 Hand Protection

Butyl rubber gloves. Natural rubber gloves. Neoprene gloves.

👁️ Eye Protection

Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.

😷 Respiratory Protection

Use NIOSH approved respirator if there is potential to exceed exposure limit(s).

🦺 Skin/Body Protection

Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

🏷️ UN Number

UN 3082

📦 Proper Shipping Name

RQ, Environmentally hazardous substance, liquid, n.o.s.

⚠️ Transport Hazard Class

9

📋 Packing Group

III

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for LOCTITE 271 THREADLOCKER HIGH STRENGTH?

The signal word for this substance is "warning".

What is the physical form of LOCTITE 271 THREADLOCKER HIGH STRENGTH?

LOCTITE 271 THREADLOCKER HIGH STRENGTH is a liquid with red color. It has mild odor.

What is the solubility of LOCTITE 271 THREADLOCKER HIGH STRENGTH?

Slight Water

What is LOCTITE 271 THREADLOCKER HIGH STRENGTH used for?

Anaerobic Sealant

What are the hazard statements for LOCTITE 271 THREADLOCKER HIGH STRENGTH?

This substance has 3 hazard statements: H315: CAUSES SKIN IRRITATION. H319: CAUSES SERIOUS EYE IRRITATION. H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

What is the melting point of LOCTITE 271 THREADLOCKER HIGH STRENGTH?

The melting point is Not applicable, Product is a liquid and the boiling point is > 150 °℃ (> 302°F).