Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE LB 8150 SV A/S known as Silver Anti-Seize Lubricant
- Product Form
- Lubricant
- Product Code
- IDH number: 501000, Item number: 37565
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
(860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy naphthenic | 64742-52-5 | 30 - 60% | Yes |
| Graphite | 7782-42-5 | 10 - 30% | Yes |
| Calcium oxide | 1305-78-8 | 10 - 30% | Yes |
| Petroleum distillates, hydrotreated, light naphthenic | 64742-53-6 | 10 - 30% | Yes |
| Aluminum not powder, dust or fume | 7429-90-5 | 5 - 10% | Yes |
| Distillates (petroleum), straight-run middle | 64741-44-2 | 1 - 5% | Yes |
| Quartz (SiO2) | 14808-60-7 | 0.1 - 1% | Yes |
Notes
Exact percentage is a trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). Get medical attention. Wash clothing before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get immediate medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
wipe up with paper towel and place in container for disposal.
absorb onto inert absorbent material and place in sealed container for disposal.
Do not allow product to enter sewer or waterways.
Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up.
Related Products
Similar products with comparable safety profiles
LOCTITE LB 771 known as LOCTITE NICKEL ANTI-SEIZE 771
---
LOCTITE LB 8008 C5-A ANTI-SEIZE known as C5-A Copper Anti Seize Tube 28g
---
LOCTITE LB 8018
---
LOCTITE LB 8008 C5-A
---
LOCTITE LB 8031
---
LOCTITE LB 8009 known as 8009, Heavy Duty A.S.
---
LOCTITE LB 8150 known as Loctite 8150 500g EGFD
---
LOCTITE LB 8156 known as Loctite 8156 500g EGFD
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed.
Keep in a cool, well ventilated area.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits.
Neoprene or oil resistant gloves.
Safety goggles or safety glasses with side shields.
If personal exposure cannot be controlled below applicable limits by ventilation, wear a properly fitted organic vapor/particulate respirator approved by NIOSH. Observe OSHA regulations for respirator use (29 CFR 1910.134).
Neoprene or oil resistant gloves.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
Strong oxidizing agents.
Irritating organic vapours. Oxides of carbon. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Follow all local, state, federal and provincial regulations for disposal.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE LB 8150 SV A/S known as Silver Anti-Seize Lubricant?
The signal word is danger.
What is the physical form of LOCTITE LB 8150 SV A/S known as Silver Anti-Seize Lubricant?
LOCTITE LB 8150 SV A/S known as Silver Anti-Seize Lubricant is a paste with silver color. It has hydrocarbon-like odor.
What are the hazard statements for LOCTITE LB 8150 SV A/S known as Silver Anti-Seize Lubricant?
This substance has 1 hazard statement:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of LOCTITE LB 8150 SV A/S known as Silver Anti-Seize Lubricant?
The melting point is Not available. and the boiling point is Not available..