NextSDS Logo
LO

LOCTITE ® 243 ™ THREADLOCKER

WARNING liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
LOCTITE ® 243 ™ THREADLOCKER
Product Code
1329505

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Threadlocker
Uses Advised Against
Do not spray.

Overview

LOCTITE ® 243 ™ THREADLOCKER commonly used threadlocker.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

warning (WARNING:)

Hazard Classifications

Skin Irr. Category 2
Eye Irrit. Category 2A
Skin Sens. Category 1

GHS Hazard Pictograms & Safety Symbols

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

Precautionary Statements

  • Avoid breathing vapors, mist, or spray.
  • Wash affected area thoroughly after handling.
  • Contaminated work clothing should not be allowed out of the workplace.
  • Wear protective gloves, eye protection, and face protection.
  • IF ON SKIN: Wash with plenty of water.
  • IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • If skin irritation or rash occurs: Get medical attention.
  • If eye irritation persists: Get medical attention.
  • Take off contaminated clothing.
  • Not prescribed
  • Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Henkel Corporation company logo - Safety Data Sheet supplier organization

Henkel Corporation

manufacturer

📍

One Henkel Way Rocky Hill, Connecticut 06067

🌍

US

📞

+1 (860) 571-5100

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Poison Control Center

📞

1-303-592-1711

🌍

US

CHEMTREC

📞

1-800-424-9300

🌍

US

💡

(toll free)

CHEMTREC

📞

1-703-527-3887

🌍

US

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Methacrylate resin Proprietary 10-30% ⚠️ Hazardous
Polyurethane Methacrylate Resin Proprietary 10-30% ⚠️ Hazardous
Polyglycol dimethacrylate Proprietary 1-5% ⚠️ Hazardous
Silane, dichlorodimethyl-, reaction products with silica 68611-44-9 1-5% ⚠️ Hazardous
Ethene, homopolymer 9002-88-4 1-5% ⚠️ Hazardous
Methacrylate Ester Proprietary 0.1-1% ⚠️ Hazardous

Additional Information

IDH number: 1329505

Composition Notes

Concentration range is provided to assist users in providing appropriate protections.

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

🖐️ Skin Contact

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.

👁️ Eye Contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

🍽️ Ingestion/Swallowing

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

🧪 Physical State
liquid
Critical Property
📊 Physical State Data
liquid
📊 State Under Standard Conditions
Not available
👁️ Appearance
Not available
🎨 Colour
blue
📊 Colour Intensity
Not available
📊 Form
Not available
👃 Odor
Acrylic, mild
📊 Odor Threshold
Not available.
🧪 Ph
Not applicable, Product is non-polar/aprotic.
🧊 Melting Point
Not applicable, Product is a liquid
Critical Property
💨 Boiling Point
> 150 °℃ (> 302°F)None
Critical Property
🔥 Flash Point
> 100 °℃ (> 212ºF) None
Critical Property
📊 Freezing Point
Not available
📊 Softening Point
Not available
📊 Solidification Point
Not available
📊 Cloud Point
Not available
📊 Crystallisation Point
Not available
📊 Relative Evaporation Rate
Not available
💨 Evaporation Rate
Not available.
💨 Vapor Pressure
< 0.1 mm hg (27 °℃ (80.6 °F))
📊 Vapor Density
1
📊 Relative Density
1.09 at 20 ℃ (68ºF)
📊 Bulk Density
Not available
⚖️ Density
Not available
🔥 Flammability
non flammable
📊 Upper Explosive Limit
Not available.
📊 Lower Explosive Limit
Not available.
📊 Explosive Limits
Not available
📊 Auto Ignition Temperature
Not available.
📊 Decomposition Temperature
Not available.
💧 Solubility
Not available
📊 Partition Coefficient
Not available.
📊 Solubility In Water
Slight
📊 Solubility In Fat
Not available
📊 Molecular Weight
Not available
📊 Voc Content
< 3 %
📊 Metal Corrosion
Not available
📊 Dynamic Viscosity
1,300.0 - 3,000.0 mPa.s
📊 Kinematic Viscosity
Not available
📊 Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits.

🧤 Hand Protection

Use chemical resistant, impermeable clothing including gloves. Neoprene gloves.

👁️ Eye Protection

Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.

😷 Respiratory Protection

Use NIOSH approved respirator if there is potential to exceed exposure limit(s).

🦺 Skin/Body Protection

Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

📦 Proper Shipping Name

Not regulated

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for LOCTITE ® 243 ™ THREADLOCKER?

The signal word for this substance is "warning".

What is the physical form of LOCTITE ® 243 ™ THREADLOCKER?

LOCTITE ® 243 ™ THREADLOCKER is a liquid with blue color. It has acrylic, mild odor.

What is LOCTITE ® 243 ™ THREADLOCKER used for?

Threadlocker

What is the melting point of LOCTITE ® 243 ™ THREADLOCKER?

The melting point is Not applicable, Product is a liquid and the boiling point is > 150 °℃ (> 302°F)None.