Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Good Sense Breakdown
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- RNF6-M0MS-D00F-K69J
Identified Uses
Hard surface cleaner. Carpet / Upholstery cleaner. Prespotter / Stain remover. For professional use only.
Uses advised against
Uses other than those identified are not recommended.
Manufacturers & Suppliers
Diversey Europe Operations BV
manufacturer
De Corridor 4, 3621ZB Breukelen [Maarssenbroeksedijk 2, 3542DN Utrecht], The Netherlands
Diversey Ltd
distributor
Weston Favell Centre, Northampton NN3 8PD, United Kingdom
01604 405311
Emergency Contacts
Emergency Contact
0800 052 0185
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| alkyl alcohol ethoxylate | 68439-46-3 | 1 - 3% | Yes |
| 2-phenoxyethanol EC: 204-589-7 | 122-99-6 | 0.1 - 1% | Yes |
| d-limonene EC: 227-813-5 | 5989-27-5 | 0.1 - 1% | Yes |
| 1,2-benzisothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 0.01 - 0.1% | Yes |
Workplace exposure limit(s), if available, are listed in subsection 8.1. ATE, if available, are listed in section 11. For the full text of the H and EUH phrases mentioned in this Section, see Section 16. Specific concentration limits: 1,2-benzisothiazol-3(2H)-one: - Skin sensitisation, Category 1 (H317) >= 0.05%
Notes
Specific concentration limits 1,2-benzisothiazol-3(2H)-one: • Skin sensitisation, Category 1 (H317) >= 0.05%. Workplace exposure limit(s), if available, are listed in sub section 8.1. ATE, if available, are listed in section 11. For the full text of the H and EUH phrases mentioned in this Section, see Section 16..
First Aid Measures
Emergency procedures for chemical exposure incidents
Get medical attention or advice if you feel unwell.
Symptoms: No known effects or symptoms in normal use.
Wash skin with plenty of lukewarm, gently flowing water. If skin irritation occurs: Get medical advice or attention.
Symptoms: No known effects or symptoms in normal use.
Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation occurs and persists, get medical attention.
Symptoms: Causes severe irritation.
Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Get medical attention or advice if you feel unwell.
Symptoms: No known effects or symptoms in normal use.
Immediate Medical Attention
Get medical attention or advice if you feel unwell. If irritation occurs and persists, get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.
No special hazards known.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Dyke to collect large liquid spills.
Dilute with plenty of water. Do not allow to enter drainage system, surface or ground water.
Absorb with liquid-binding material. Collect in closed and suitable containers for disposal.
Materials: sand, diatomite, universal binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash hands before breaks and at the end of workday. Avoid contact with eyes. Use only with adequate ventilation.
Store in accordance with local and national regulations. Store in a closed container. Keep only in original packaging.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Wash hands before breaks and at the end of workday.
No special precautions required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide a good standard of general ventilation. Ensure that foam equipment does not generate respirable particles.
No special requirements under normal use conditions.
Safety glasses are not normally required. However, their use is recommended in those cases where splashes may occur when handling the product (EN 16321 / EN 166).
Respiratory protection is not normally required. However, inhalation of vapour, spray, gas or aerosols should be avoided. Trigger spray bottle application: No special requirements under normal use conditions. Apply technical measures to comply with the occupational exposure limits, if available.
No special requirements under normal use conditions.
No special requirements under normal use conditions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and use conditions.
No reactivity hazards known under normal storage and use conditions.
No hazardous reactions known under normal storage and use conditions.
None known under normal storage and use conditions.
None known under normal use conditions.
None known under normal storage and use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance's PBT/vPvB status is referenced in section 3.
12.6 Endocrine disrupting properties
12.7 Other adverse effects
No other adverse effects known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The concentrated contents or contaminated packaging should be disposed of by a certified handler or according to the site permit.
The concentrated contents or contaminated packaging should be disposed of by a certified handler or according to the site permit.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Non-dangerous goods
- Shipping Name
- Non-dangerous goods
- Transport Class
- Non-dangerous goods
- Packing Group
- Non-dangerous goods
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Good Sense Breakdown?
The signal word is warning.
What is the physical form of Good Sense Breakdown?
Good Sense Breakdown is a liquid with hazy, red color. It has product specific odor.
What is the solubility of Good Sense Breakdown?
Fully miscible
What is Good Sense Breakdown used for?
Hard surface cleaner. Carpet / Upholstery cleaner. Prespotter / Stain remover. For professional use only.
What are the hazard statements for Good Sense Breakdown?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of Good Sense Breakdown?
The melting point is Not determined and the boiling point is Not determined.