Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RE-HEALING™ RF1, 1% Foam
- Synonyms
- RE-HEALING RF1; RF1
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable (mixture)
Identified Uses
Fire extinguishing medium: concentrate
Uses advised against
No uses advised against known
Manufacturers & Suppliers
SOLBERG SCANDINAVIAN AS - NORWAY
Olsvollstranda, NO-5938 Sæbøvågen
+47 56 34 97 00
SOLBERG SCANDINAVIAN AS - NORWAY
manufacturer
Olsvollstranda, NO-5938 Sæbøvågen
+47 56 34 97 00
The Solberg Company
manufacturer
1520 Brookfield Avenue, US-WI54313 Green Bay - USA
Solberg Asia Pacific Pty Ltd
manufacturer
3 Charles Street, AU-NSW 2760 St. Marys - Australia
+61 2 96 73 53 00
Emergency Contacts
Europe, Middle East, Africa
+47 97 64 00 00
24h/24h
AMERICAS
+1 920 593 94 45
24h/24h
ASIA-PASIFIC
+61 2 9430 63 96
24h/24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| D-glucopyranose, oligomers, decyl octyl glycosides EC: 500-220-1 | 68515-73-1 | 3% | Yes |
| 2-(2-butoxyethoxy)ethanol EC: 203-961-6 | 112-34-5 | 5% | Yes |
| 1-propanaminium, N-(3-aminopropyl)-2-hydroxy-N,N-dimethyl-3-sulfo-, N-coco acyl derivs., hydroxides, inner salts EC: 268-761-3 | 68139-30-0 | 5% | Yes |
| 1-propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-, N-coco acyl derivs., hydroxides, inner salts EC: 263-058-8 | 61789-40-0 | 3% | Yes |
| sucrose EC: 200-334-9 | 57-50-1 | 1% | No |
| sodium octyl sulphate EC: 205-535-5 | 142-31-4 | 10% | Yes |
| alcohols, C9-11, branched and linear, ethoxylated, sulfates, sodium salts (>1 <2.5 mol EO) EC: 500-465-4 | 160901-28-0 | 3% | Yes |
| sodium decyl sulphate EC: 205-568-5 | 142-87-0 | 1% | Yes |
| sulfuric acid, mono-C12-14 (even numbered)-alkyl esters, compds. with triethanolamine | --- | 10% | Yes |
Notes
For H-statements in full: see heading 16 Substance with a Community workplace exposure limit Subject to restrictions of Annex XVII of Regulation (EC) No. 1907/2006 Specific concentration limits, see heading 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.
Symptoms: No effects known.
Wash immediately with lots of water. Take victim to a doctor if irritation persists.
Symptoms: Tingling/irritation of the skin.
Rinse immediately with plenty of water for 15 minutes. Do not apply neutralizing agents. Take victim to an ophthalmologist.
Symptoms: Inflammation/damage of the eye tissue. Corrosion of the eye tissue.
Rinse mouth with water. Consult a doctor/medical service if you feel unwell.
Symptoms: No effects known.
Immediate Medical Attention
Depending on the victim's condition: doctor/hospital.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Adapt extinguishing media to the environment.
No unsuitable extinguishing media known.
On burning: release of toxic and corrosive gases/vapours (nitrous vapours, sulphur oxides, carbon monoxide - carbon dioxide).
Cool tanks/drums with water spray/remove them into safety. Dilute toxic gases with water spray.
Firefighter Protection
Gloves. Face-shield. Protective clothing. Heat/fire exposure: compressed air/oxygen apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain released substance, pump into suitable containers. Plug the leak, cut off the supply.
Take up liquid spill into inert absorbent material, e.g.: sand/earth. Scoop absorbed substance into closing containers. Clean contaminated surfaces with an excess of water.
Materials: inert absorbent material, e.g.: sand/earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from naked flames/heat. Observe normal hygiene standards. Keep container tightly closed.
Storage temperature: -30 - 49 °C. Store in a cool area. Keep out of direct sunlight. Keep container in a well-ventilated place. Meet the legal requirements.
Observe normal hygiene standards.
Keep away from naked flames/heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Keep away from naked flames/heat. Measure the concentration in the air regularly. Carry operations in the open/under local exhaust/ventilation or with respiratory protection.
Chemical-resistant gloves.
Face shield.
Wear gas mask with filter type A if conc. in air > exposure limit.
Protective clothing.
See headings 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No data available.
No data available.
Keep away from naked flames/heat.
Oxidizing agents.
On burning: release of toxic and corrosive gases/vapours (nitrous vapours, sulphur oxides, carbon monoxide - carbon dioxide).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycle/reuse. Dilute. Remove waste in accordance with local and/or national regulations. Hazardous waste shall not be mixed together with other waste. Different types of hazardous waste shall not be mixed together if this may entail a risk of pollution or create problems for the further management of the waste. Hazardous waste shall be managed responsibly. All entities that store, transport or handle hazardous waste shall take the necessary measures to prevent risks of pollution or damage to people or animals. May be discharged to wastewater treatment installation or reed bed.
Recycle/reuse. Dilute. Remove waste in accordance with local and/or national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is RE-HEALING™ RF1, 1% Foam known by?
RE-HEALING™ RF1, 1% Foam is also known as: RE-HEALING RF1; RF1
What is the hazard signal word for RE-HEALING™ RF1, 1% Foam?
The signal word is danger.
What is the physical form of RE-HEALING™ RF1, 1% Foam?
RE-HEALING™ RF1, 1% Foam is a liquid with yellow to amber color. It has pleasant odour odor.
What is the solubility of RE-HEALING™ RF1, 1% Foam?
water ; Complete
What is RE-HEALING™ RF1, 1% Foam used for?
Fire extinguishing medium: concentrate
What are the hazard statements for RE-HEALING™ RF1, 1% Foam?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
What is the melting point of RE-HEALING™ RF1, 1% Foam?
The melting point is -15 °C and the boiling point is 95 °C.