SOLBERG® RE-HEALING™ RF1

Remove the person affected from the exposure area and provide with fresh air. Seek medical attention if the symptoms get worse or persist.

Remove contaminated clothes and shoes, rinse the skin or if necessary shower the affected person thoroughly with cold water and neutral soap. In case of serious reaction consult a doctor.

Rinse eyes thoroughly with lukewarm water for at least 15 minutes. Do not allow the person affected to rub or close their eyes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, in which case this could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS of the product.

Do not induce vomiting, but if it does happen keep the head down to avoid aspiration. Keep the person affected at rest. Rinse out the mouth and throat, as they may have been affected during ingestion.

Product is non-flammable under normal conditions of storage, handling and use. In the case of combustion as a result of improper handling, storage or use preferably use polyvalent powder extinguishers (ABC powder), in accordance with the Regulation on fire protection systems.

Non-applicable

As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and, consequently, can present a serious health risk.

Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and tanks for products susceptible to combustion, explosion or BLEVE as a result of high temperatures.

Isolate leaks provided that there is no additional risk for the people performing this task. Evacuate the area and keep out those who do not have protection.

It is recommended to avoid environmental spillage of both the product and its container.

Absorb the spillage using sand or inert absorbent and move it to a safe place.

Materials: sand or inert absorbent

Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Maintain order, cleanliness and dispose of using safe methods (section 6).

Avoid sources of heat, radiation, static electricity and contact with food. For additional information see sub section 10.5

Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Product is non-flammable under normal conditions of storage, handling and use.

Protective gloves against minor risks (CE CAT I). Replace gloves in case of any sign of damage. For prolonged periods of exposure to the product for professional users/industrials, we recommend using CE III gloves in line with standards EN 420:2004+ A1:2010 and EN ISO 374-1:2016+A1:2018

Panoramic glasses against splash/projections (CE CAT II). EN 166:2002 EN ISO 4007:2018. Clean daily and disinfect periodically according to the manufacturer's instructions. Use if there is a risk of splashing.

Work clothing (CE CAT I): Replace before any evidence of deterioration. For periods of prolonged exposure to the product for professional/industrial users CE III is recommended, in accordance with the regulations in EN ISO 6529:2013, EN ISO 6530:2005, EN ISO 13688:2013, EN 464:1994. Anti-slip work shoes (CE CAT II): EN ISO 20347:2012. Replace before any evidence of deterioration. For periods of prolonged exposure to the product for professional/industrial users CE III is recommended, in accordance with the regulations in EN ISO 20345:2012 y EN 13832-1:2007

In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container.

Chemically stable under the indicated conditions of storage, handling and use.

No hazardous reactions are expected because the product is stable under recommended storage conditions.

Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.

Shock and friction: Not applicable; Contact with air: Not applicable; Increase in temperature: Not applicable; Sunlight: Not applicable; Humidity: Not applicable

Avoid strong acids, Avoid alkalis or strong bases

Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO), carbon monoxide and other organic compounds.

Consult the authorized waste service manager on the assessment and disposal operations in accordance with Annex 1 and Annex 2 (Directive 2008/98/EC).