NextSDS Logo
Safety Data Sheet EN

SPM Spectrum lures (Blue, Green, Red & Yellow)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SPM Spectrum lures (Blue, Green, Red & Yellow)
Product Code
10606, 10607, 10608 & 10609

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Insect monitoring lure

Manufacturers & Suppliers

A

Agrisense

manufacturer

Taffs Mead Road, Treforest Industrial Estate, Pontypridd, South Wales, CF37 5SU, UK

+44 (0)1443 841155

Emergency Contacts

Emergency Contact

112

24h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

No detailed information is provided as none of the components require listing under the provisions of Annex II of Reg. (EC) 453/2010

According to Annex VI of Reg. 1272/2008 and ECHA evaluation for registered substances. For the meaning of the indications of danger and of the risk phrases, please refer to section 16

Notes

No detailed information is provided as none of the components require listing under the provisions of Annex II of Reg. (EC) 453/2010

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If adverse effects are felt, move person to fresh air. If symptoms persist call a doctor for medical advice.

Skin contact

Wash hands thoroughly after handling product with water and soap. If irritation occurs, call a doctor for medical advice.

Symptoms: Prolonged contact with lure may cause irritation.

Eye contact

In case of contact, hold eyes open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses if worn after the first five minutes and continue rinsing. If irritation occurs, call a doctor for medical advice.

Ingestion

In case of ingestion, rinse out mouth with water. Do not induce vomiting. If feeling unwell after ingestion occurs call a doctor for medical advice.

Immediate Medical Attention

Due to the formulation type, it is not likely to need special or immediate medical treatments.

Medical Treatment

Due to the formulation type, it is not likely to need special or immediate medical treatments.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

dry chemical, foam, carbon dioxide (CO₂)

Specific hazards

Carbon oxides formed when the product is burned.

Instructions

Evacuate area of all unnecessary personnel. Use standard firefighting procedures.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Avoid contamination of soil, water sources and sewers.

Cleanup methods

collect lures, seal in a suitable container and remove for disposal

Materials: suitable container

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear protective clothing as described in section 8, if justified by exposure conditions. Avoid unnecessary contact with eyes and skin. Avoid vapour inhalation.

Storage

Store in original container in a cool, dry and well ventilated area until used. Store away from heat and out of direct sunlight. The Product may be stored in a freezer.

Hygiene

Do not eat drink or smoke while handling the product. Wash hands after thoroughly after handling with soap and water.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Not generally required under normal use conditions.

Eyes

Avoid contact with eyes. No type of specific protective equipment is required.

Respiratory

Not generally required under normal use conditions.

Skin/Body

Not generally required under normal use conditions.

Environmental

Avoid contamination of soil, water sources and sewers.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor
---
Solubility
Not applicable for the product.
Flash Point
> 155°C
Bulk Density
---
Metal Corrosion
---
Appearance
Polymer vial, various colours
Colour
various colours
Partition Coefficient
Not applicable for the product.
Explosive Limits
---
Form
---
Boiling Point
Not applicable for the product.
Relative Evaporation Rate
---
Properties Status
---
Vapor Density
Not established for the product.
Density
---
Melting Point
> 90°C
Upper Explosive Limit
Not established for the product.
Colour Intensity
---
Softening Point
---
Physical State
---
Flammability
Not established for the product
Ph
Not applicable for the product.
Solubility In Water
---
Kinematic Viscosity
Not applicable for the product.
Freezing Point
> 90°C
Dynamic Viscosity
Not applicable for the product.
Evaporation Rate
Not established for the product.
Lower Explosive Limit
Not established for the product.
Voc Content
---
Cloud Point
---
Odor Threshold
---
Relative Density
Not applicable for the product.
Auto Ignition Temperature
Not established for the product.
Solubility In Fat
---
Physical State Data
solid
Decomposition Temperature
Not established for the product.
Molecular Weight
---
State Under Standard Conditions
---
Crystallisation Point
---
Vapor Pressure
Not applicable for the product.
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under recommended storage conditions.

Reactivity

No reactivity reactions are known or expected to occur as to normal uses conditions.

Hazardous reactions

No hazardous reactions are known or expected when the product is stored and handled according to the recommended instructions.

Avoid

Protect product from heat and direct sunlight.

Incompatible

None known.

Decomposition

Not expected under the conditions of use.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Do not allow product to reach sewage system. Dispose of in accordance with community, national or regional laws.

Disposal

Dispose of in accordance with community, national or regional laws.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not classifi ed.
Shipping Name
Not applicable.
Transport Class
Not applicable.
Packing Group
Not applicable.
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

No data available.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SPM Spectrum lures (Blue, Green, Red & Yellow)?

The signal word is no signal word.

What is the solubility of SPM Spectrum lures (Blue, Green, Red & Yellow)?

Not applicable for the product.

What is SPM Spectrum lures (Blue, Green, Red & Yellow) used for?

Insect monitoring lure

What is the melting point of SPM Spectrum lures (Blue, Green, Red & Yellow)?

The melting point is > 90°C and the boiling point is Not applicable for the product..