Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TENSARYL HAP804
- Product Code
- 40.080
- Chemical Name
- Dodecylbenzene sulphonic acid sodium salt
Regulatory Identifiers
- CAS Number
- 72804 Check regulations →
Manufacturers & Suppliers
TensaChem SA
manufacturer
Rue de Renory 28, B – 4102 Ougrée, Belgium
+32 4 33 89 343
Emergency Contacts
Belgian National Poisons Information Centre
+32 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS05
GHS07
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
INCI name: Sodium Dodecylbenzenesulfonate
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dodecylbenzene sulphonic acid sodium salt EC: 246-580-4 | 25155-30-0 | --- | Yes |
Symbol: Xn; Risk-phrase(s): R 22, 38, 41
First Aid Measures
Emergency procedures for chemical exposure incidents
Not likely to occur.
Remove contaminated clothing. After contact with skin, wash immediately with plenty of water. Seek medical advice if irritation develops. Launder clothes before reuse.
Symptoms: Irritating to skin.
Rinse immediately and as long as possible with plenty of water. Eyelids should be held away from the eyeball to ensure thorough rinsing. Seek medical attention if irritation persists.
Symptoms: Irritating to eyes. In case of inadequate first-aid measures there is a possibility of persistent effects on the eye.
Rinse mouth with water. DO NOT DRINK. DO NOT INDUCE VOMITING because of risk of aspiration. Seek medical advice.
Symptoms: Harmful if swallowed.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical attention.
Medical Treatment
Symptomatic treatment is advised.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All extinguishing products are allowed
high pressure water jets
None known
Firefighter Protection
Use self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to escape into sewage system or watercourses.
Collect as much as possible in a clean container for (preferable) reuse or disposal. Cover the remainder with inert absorbent (e.g. vermiculite) for disposal. Flush away the traces with water.
Materials: clean container, inert absorbent (e.g. vermiculite)
Related Products
Similar products with comparable safety profiles
TENSOPOL S30LSK
UFI: RQD0-G0J9-7005-KFS9
HiTEC® 2414B Performance Additive
---
HiTEC® 2414B Performance Additive
---
HiTEC® 8483 Performance Additive
---
HiTEC® 9801B Performance Additive
UFI: 6UJU-N4RP-XQ4J-UXJJ
HiTEC® 402 Performance Additive
UFI: 6KX1-SC6C-R20M-DTXY
HiTEC® 2414 Performance Additive
---
HiTEC® 4032 Performance Additive
UFI: PD5R-R4HH-9756-V4AV
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Slippery floor if spillage.
Store in closed containers. Storage temperature: 60 - 90°C. Avoid mild steel storage.
No specific recommendations.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The general precautionary measures for handling chemicals should be observed.
Wear suitable gloves
Wear eye/face protection
No specific recommendations
Wear appropriate clothing, slipproof shoes.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and handled properly.
Temperatures in excess of 95°C or below 70°C.
Strong acids, strong oxidising agents.
If stored in non appropriate temperature condition (> 150°C) or if enters in contact with acids, product may give off carbon oxides and sulphur oxides derivatives.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No data available.
12.2 Persistence and degradability
Readily biodegradable.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
According to local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling according to EC directives
Symbol(s): HARMFUL (Xn); Risk phrase(s): R22, R38, R41; Safety phrase(s): S26, S28, S37/39, S46
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TENSARYL HAP804?
The signal word is danger.
What is the physical form of TENSARYL HAP804?
TENSARYL HAP804 is a highly viscous paste appearing as highly viscous paste with yellow to pale yellow color. It has typical odor.
What are the hazard statements for TENSARYL HAP804?
This substance has 2 hazard statements:
- H315: Irritating to skin.
- H318: Risk of serious damage to eyes.
What is the melting point of TENSARYL HAP804?
The melting point is No clear melting point and the boiling point is > 100°C.