NextSDS Logo
Safety Data Sheet EN

High oleic sunflower oil

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
High oleic sunflower oil
Product Form
Winterised, deacidified, bleached fully refined high oleic sunflower oil.

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Food

Emergency Contacts

Emergency Contact

0032/(0)9.386.75.12

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Triglycerid 8001-21-6 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Not applicable

Skin contact

Wash area with plenty soap and water. Remove any heavily contaminated clothing.

Eye contact

Flush out eyes with clean water, whilst lifting the eyelids, continue for 10 minutes or until the irritation subsides. Seek medical help if irritation persists.

Ingestion

If swallowed, give water or milk to drink and seek medical advice.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, CO2, fire fighting powder, sand.

Unsuitable media

Water.

Specific hazards

Thomas composition produces Acrolein C3H4O

Firefighter Protection

No special measures required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Must not be allowed to drain into sewers.

Cleanup methods

Take up by absorbent materials.

Materials: absorbent materials

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

May splash in contact with water when hot

Fire prevention

Fire hazard when welding the empty container

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

None.

Hands

Not applicable.

Eyes

Not applicable.

Respiratory

Not applicable.

Skin/Body

Not applicable.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
---
Auto Ignition Temperature
When finely dispersed, e.g. in bleaching earth
Molecular Weight
---
Partition Coefficient
---
Colour
Yellow
Solubility In Water
Insoluble
Colour Intensity
clear and brilliant
Solubility In Fat
---
Relative Evaporation Rate
---
Physical State Data
liquid
Voc Content
---
Dynamic Viscosity
Approx. 56 – 65 mPas at 20°C (DGF C – IV 7)
Solidification Point
from –5 to –8°C
Boiling Point
> 230°C
State Under Standard Conditions
---
Density
918 – 923 kg/m³ (DGF C – IV 2)
Flammability
When finely dispersed, e.g. in bleaching earth
Evaporation Rate
---
Ph
not applicable
Odor Threshold
---
Vapor Density
---
Bulk Density
---
Melting Point
< 0°C
Cloud Point
---
Explosive Limits
---
Metal Corrosion
---
Decomposition Temperature
> 230°C
Kinematic Viscosity
---
Lower Explosive Limit
---
Physical State
liquid to –5°C
Freezing Point
---
Vapor Pressure
< 1 mbar at 20°C
Solubility
Insoluble in water, unlimited in lophophilic solvents
Odor
Neutral to natural
Upper Explosive Limit
---
Crystallisation Point
---
Appearance
Yellow, clear and brilliant at room temperature.
Flash Point
> 285°C (DGF C – IV 8) for the pure substance
Softening Point
---
Properties Status
---
Form
liquid to -5°C
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Avoid

Nothing specific

Decomposition

Thermal decomposition leads to formation of Acrolein

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Can be incinerated together with household refuse with due regard for local and official regulations.

Waste Codes

020304 Technical Regulations on Waste Disposal national code
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Marking not mandatory as defined by EC Directive

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for High oleic sunflower oil?

The signal word is no signal word.

What is the physical form of High oleic sunflower oil?

High oleic sunflower oil is a liquid to –5°c appearing as yellow, clear and brilliant at room temperature. with yellow color. It has neutral to natural odor.

What is the solubility of High oleic sunflower oil?

Insoluble in water, unlimited in lophophilic solvents

What is High oleic sunflower oil used for?

Food

What is the melting point of High oleic sunflower oil?

The melting point is < 0°C and the boiling point is > 230°C.