Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SODIUM SILICATE, MOLAR RATIO 1,6 – 2,6
- Chemical Name
- Sodium silicate, 1,6 < molar ratio ≤ 2,6
- Synonyms
- Britesil C20 Britesil C24 Britesil HS240 Britesil C20-P Britesil C24-P Britesil H24 Britesil H20 3Na SAT SODIUM SILICATE 3Na
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Detergent industry – raw material Water- and waste water treatment – process chemical Refractory industry – raw material
Manufacturers & Suppliers
PQ Europe
manufacturer
PQ Nederland B.V., Ankerkade 111, 6222 NL Maastricht
+31 43 3525959
Emergency Contacts
PQ Europe, The Netherlands, Maastricht
+31 43 3525959
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS05
GHS07
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Sodium silicate in powder and granular form, 1,6 < molar ratio ≤ 2,6
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium silicate, 1,6 < molar ratio ≤ 2,6 EC: 215-687-4 | 1344-09-8 | 80% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, rest, half upright position, loosen clothing. Seek medical advice if irritation develops.
Symptoms: Irritating to respiratory system.
Remove immediately all contaminated clothing. Wash immediately with plenty of water. Seek medical advice if irritation develops.
Symptoms: Irritating to skin.
Thoroughly rinse immediately with plenty of water for 15 minutes. Eyelids should be held away from the eyeball to ensure thorough rinsing. Ophthalmic treatment necessary.
Symptoms: Causes injury to the cornea and eyelids. Risk of serious damage to eyes.
Only when conscious, rinse mouth, give plenty of water to drink. Do not induce vomiting. Seek medical advice.
Medical Treatment
No specific recommendation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not combustible. Use extinguishing media appropriate to the source of the fire.
Unsuitable extinguishing media are not known.
Beware of the caustic aqueous solution of the product.
Firefighter Protection
Use appropriate protective equipment to the source of the fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drains, surface water, groundwater and soil.
Collect the material completely in a clean container for (preferable) reuse or disposal. Sweep remaining material with a broom.
Materials: clean container, broom
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothing. Avoid dust generation. The usual precautionary measures for handling chemicals should be observed. For personal protection see section 8.
The product is hygroscopic and may form lumps. Store in a dry and cool place. Keep the original package or container closed if not in use.
Avoid contact with skin, eyes and clothing.
No specific recommendations.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under recommended storage and handling conditions (see section 7).
The product reacts with aluminum and other light metals and their alloys, tin and zinc to generate hydrogen which can form explosive mixtures with air. Acids decomposes the product and silicic acid precipitates. Reacts with acids with formation of heat.
Avoid contact with humidity and Carbon dioxide.
aluminum and other light metals and their alloys, tin and zinc, glass surfaces, acids.
Corrosive sodium oxide vapours may be generated at high temperatures.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.2 Persistence and degradability
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal in accordance with EC directive 91/692/EEC.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- not relevant
- Packing Group
- not relevant
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labeling according to EC directives: Irritant
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is SODIUM SILICATE, MOLAR RATIO 1,6 – 2,6 known by?
SODIUM SILICATE, MOLAR RATIO 1,6 – 2,6 is also known as: Britesil C20 Britesil C24 Britesil HS240 Britesil C20-P Britesil C24-P Britesil H24 Britesil H20 3Na SAT SODIUM SILICATE 3Na
What is the hazard signal word for SODIUM SILICATE, MOLAR RATIO 1,6 – 2,6?
The signal word is danger.
What is the physical form of SODIUM SILICATE, MOLAR RATIO 1,6 – 2,6?
SODIUM SILICATE, MOLAR RATIO 1,6 – 2,6 is a solid appearing as fine, hygroscopic granules (mean particle size: 80 –900 micrometer) with white color. It has odourless odor.
What is SODIUM SILICATE, MOLAR RATIO 1,6 – 2,6 used for?
Detergent industry – raw material Water- and waste water treatment – process chemical Refractory industry – raw material
What are the hazard statements for SODIUM SILICATE, MOLAR RATIO 1,6 – 2,6?
This substance has 3 hazard statements:
- EUH071: The product is alkaline.
- H318: Risk of serious damage to eyes.
- H335: Irritating to respiratory system and skin.
What is the melting point of SODIUM SILICATE, MOLAR RATIO 1,6 – 2,6?
The melting point is not determined and the boiling point is not applicable.