Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EDTA Tetrasodium Salt 0.800 ± 0.004 M
- Product Code
- 1439901
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory reagent Hardness determination Standard solution
Uses advised against
No information available
Manufacturers & Suppliers
Hach Sales & Service LP.
distributor
3020 Gore Road, London, Ontario N5V 4T7 Canada
1-800-665-7635
Hach Company
manufacturer
P.O. Box 389 Loveland, CO 80539 USA
+1(970) 669-3050
Emergency Contacts
Chemtrec
1-800-424-9300
CANUTEC
613-992-4624
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Get medical attention immediately if symptoms occur.
Wash off immediately with soap and plenty of water for at least 15 minutes. Get medical attention if irritation develops and persists.
Get immediate medical advice/attention. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing. Do not rub affected area.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Call a physician.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Caution: Use of water spray when fighting fire may be inefficient.
No information available.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Only persons properly qualified to respond to an emergency involving hazardous substances should respond to a spill involving chemicals.
Prevent further leakage or spillage if safe to do so.
Pick up and transfer to properly labeled containers.
Related Products
Similar products with comparable safety profiles
EDTA (0.5M, pH 7.4)
---
EDTA Disodium, dihydrate
---
EDTA DISODIUM SALT 0.5M (1N) STANDARDIZED SOLUTION
UFI: N6UM-9QA6-EX3G-1VTJ
EDTA Solution, 17%
---
Ethylenediaminetetraacetic acid disodium salt dihydrate
CAS: 6381-92-6
Ethylenediaminetetraacetic acid
CAS: 60-00-4
HSH EDTA 15% Solution
---
Sodium thiosulfate 0.1 mol/l
CAS: 10102-17-7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product.
Keep containers tightly closed in a dry, cool and well-ventilated place. Store locked up. Keep out of the reach of children.
Do not eat, drink or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Showers, Eyewash stations, Ventilation systems.
Wear suitable gloves.
Tight sealing safety goggles.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable protective clothing.
Local authorities should be advised if significant spillages cannot be contained. Do not allow into any sewer, on the ground or into any body of water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Not applicable.
None under normal processing.
None known based on information supplied.
Strong acids. Strong bases. Strong oxidizing agents.
Carbon dioxide. Carbon monoxide. Nitrogen oxides. Sodium oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Export Notification requirements: Not applicable
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EDTA Tetrasodium Salt 0.800 ± 0.004 M?
The signal word is danger.
What is the physical form of EDTA Tetrasodium Salt 0.800 ± 0.004 M?
EDTA Tetrasodium Salt 0.800 ± 0.004 M is a liquid appearing as aqueous solution with colorless color. It has odorless odor.
What is the solubility of EDTA Tetrasodium Salt 0.800 ± 0.004 M?
Soluble
What is EDTA Tetrasodium Salt 0.800 ± 0.004 M used for?
Laboratory reagent Hardness determination Standard solution
What are the hazard statements for EDTA Tetrasodium Salt 0.800 ± 0.004 M?
This substance has 1 hazard statement:
- H318: Causes serious eye damage
What is the melting point of EDTA Tetrasodium Salt 0.800 ± 0.004 M?
The melting point is -14 °C / 7 °F and the boiling point is 104 °C / 219 °F.