Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Armor All Original Protectant - Spray
- Product Form
- Spray
- Product Code
- 070612151308
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
General use
Manufacturers & Suppliers
Energizer Manufacturing, Inc.
manufacturer
25225 Detroit Rd. Westlake OH 44145 United States
800-383-7323; 314-985-2000 (USA / CANADA)
http://data.energizer.com
Energizer Trading Ltd.
distributor
Sword House, Totteridge Road, High Wycombe, HP13 6DG, UK
+44(0)8000353376
Emergency Contacts
Emergency information service
1-314-985-1511
Mon-Fri 09:00 AM - 05:00 PM
Emergency information service
1-800-526-4727
Mon-Fri 09:00 AM - 05:00 PM
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Description of the mixture
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,2-Benzisothiazolin-3-one | 2634-33-5 | 1% | Yes |
For full text of abbreviations: see SECTION 16.
Notes
For full text of abbreviations: see SECTION 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.
Wash with plenty of soap and water.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, BC-powder, Carbon dioxide (CO2)
Water jet
In case of fire and/or explosion do not breathe fumes. Coordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Remove persons to safety. For emergency responders: Wear breathing apparatus if exposed to vapors/dust/aerosols/gases.
Wipe up with absorbent material (e.g. cloth, fleece).
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage. Place in appropriate containers for disposal. Ventilate affected area.
Materials: absorbent material (e.g. cloth, fleece), sawdust, kieselgur (diatomite), sand, universal binder
Related Substances
Similar chemicals with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Use only in well-ventilated areas. Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Protect against external exposure, such as Frost
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection.
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
No known hazardous reactions.
There are no specific conditions known which have to be avoided.
Oxidizers
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities.
Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- not assigned
- Transport Class
- not assigned
- Packing Group
- not assigned
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Armor All Original Protectant - Spray?
The signal word is no signal word.
What is the physical form of Armor All Original Protectant - Spray?
Armor All Original Protectant - Spray is a liquid with various color. It has characteristic odor.
What is the solubility of Armor All Original Protectant - Spray?
not determined
What is Armor All Original Protectant - Spray used for?
General use
What is the melting point of Armor All Original Protectant - Spray?
The melting point is not determined and the boiling point is 100 °C.