Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
KEMTEX PREFILL GAS - SOLVENT 300 ML commonly used su3: industrial uses: uses of substances as such or in preparations at industrial sites su22: professional uses: public domain (administration, education, entertainment, services, craftsmen) pc9a coatings and paints, thinners, paint removers proc7 industrial spraying proc11 non industrial spraying spray varnish.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS05
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H222: Extremely flammable aerosol.
- H229: Pressurized container: May burst if heated
- H315: Causes skin irritation
- H318: Causes serious eye damage
- H336: May cause drowsiness or dizziness
Precautionary Statements
- P403: Store in a well-ventilated place
- P101: If medical advice is needed, have product container or label at hand
- P102: Keep out of reach of children
- P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking
- P251: Pressurized container: Do not pierce or burn, even after use
- P260: Do not breathe spray
- P211: Do not spray on an open flame or other ignition source
- P280: Wear protective gloves/eye protection
- P271: Use only outdoors or in a well-ventilated area
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
- P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
- P302+P352: IF ON SKIN: Wash with plenty of soap and water
- P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50C/122F
- P501: Dispose of contents/container in accordance with local/regional/national/international regulations
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
KEMTEX H.C.T. nv
undefined
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+31 (0) 598 62 66 66
NL
During normal opening hours
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Active substance with propellant
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| DIMETHYL ETHER EC: 204-065-8 | 115-10-6 | 50-75% | ⚠️ Hazardous |
| ACETONE EC: 200-662-2 | 67-64-1 | 25-50% | ⚠️ Hazardous |
| N-BUTYL ACETATE EC: 204-658-1 | 123-86-4 | 3-10% | ⚠️ Hazardous |
| BUTANOL EC: 200-751-6 | 71-36-3 | 3-5% | ⚠️ Hazardous |
| 2-BUTOXYETHANOL EC: 203-905-0 | 111-76-2 | 1-2.5% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Supply fresh air; consult doctor in case of complaints
👁️ Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
🍽️ Ingestion/Swallowing
Do not induce vomiting; call for medical help immediately.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🧤 Hand Protection
The glove material has to be impermeable and resistant to the product/the substance/the preparation. Due to missing tests no recommendation to the glove material can be given for the product/the preparation/the chemical mixture. Protective gloves. Solvent resistant gloves. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Nitrile rubber, NBR. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
👁️ Eye Protection
Tightly sealed goggles
😷 Respiratory Protection
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter AX/P2
🦺 Skin/Body Protection
Use protective suit
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1950
📦 Proper Shipping Name
AEROSOLS
⚠️ Transport Hazard Class
2.1
📋 Packing Group
Void
🚛 ADR Transport Precautions
Warning Gases
🚢 IMDG Maritime Transport Precautions
Warning Gases
✈️ IATA Air Transport Precautions
Warning Gases
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for KEMTEX PREFILL GAS - SOLVENT 300 ML?
The signal word for this substance is "danger".
What is KEMTEX PREFILL GAS - SOLVENT 300 ML used for?
SU3: Industrial uses: Uses of substances as such or in preparations at industrial sites SU22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen) PC9a Coatings and paints, thinners, paint removers PROC7 Industrial spraying PROC11 Non industrial spraying Spray varnish
What are the hazard statements for KEMTEX PREFILL GAS - SOLVENT 300 ML?
This substance has 5 hazard statements: H222: Extremely flammable aerosol. H229: Pressurized container: May burst if heated H315: Causes skin irritation H318: Causes serious eye damage H336: May cause drowsiness or dizziness
What is the melting point of KEMTEX PREFILL GAS - SOLVENT 300 ML?
The melting point is Undetermined and the boiling point is -24C.