NextSDS Logo
Safety Data Sheet EN

Clinell Peracetic Acid Wipes

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Clinell Peracetic Acid Wipes
Product Form
Dry single use surface wipes

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Surface disinfection and cleaning of non-invasive medical devices

Manufacturers & Suppliers

G

GAMA Healthcare Ltd

manufacturer

The Maylands Building, Maylands Avenue, Hemel Hempstead Industrial Estate, Hemel Hempstead, HP2 7TG, United Kingdom

+44 (0) 207 993 0030

E

Emergo Europe BV

Westervoortsedijk 60, 6827 AT Arnhem, The Netherlands

+31 (0) 70 345 8570

Emergency Contacts

Emergency Contact

+44 (0) 207 993 035

Monday – Thursday, 9-5pm; Friday, 9-4pm (excluding UK bank holidays)

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H318 Causes serious eye damage

Precautionary Statements

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture
Chemical Name CAS Number Concentration Hazardous
Sodium Percarbonate EC: 239-707-6 15630-89-4 50% Yes
Citric Acid EC: 201-069-1 77-92-9 15% Yes
Tetraacetylethylenediamine --- 25% No

Notes

Full list of hazard statements available in section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Skin contact

If skin irritation occurs, get medical advice.

Symptoms: skin irritation

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing.

Symptoms: serious damage to eyes

Ingestion

Wash mouth out thoroughly and give water to drink. Seek immediate medical attention. Do not induce vomiting unless instructed by medical personnel.

Immediate Medical Attention

Seek immediate medical attention.

Medical Treatment

Do not induce vomiting unless instructed by medical personnel.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, carbon dioxide, dry chemical and foam

Specific hazards

When heated sufficiently, product may decompose to form smoke and toxic fumes, gases or vapours.

Firefighter Protection

Fire fighters should wear an approved self-contained breathing apparatus and full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

None anticipated or expected to be required.

Environmental

None anticipated or expected to be required.

Cleanup methods

None anticipated or expected to be required.

Materials: None anticipated or expected to be required.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes. Use according to the instructions for use. Ventilation may be necessary when using in a confined space.

Storage

Store in cool, dry, well ventilated area, away from direct sunlight in low humidity. Keep container closed when not in use.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

For industrial use of the product, good general ventilation is recommended.

Eyes

Prevent eye contact.

Skin/Body

Where more extensive contact may occur, wear suitable protective clothing (e.g. apron, sleeves).

Environmental

Not anticipated or expected to be required.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Non-woven wipe containing solid powder particles
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
Wipe containing white powder particles
Colour Intensity
---
Form
---
Odor
Slight vinegar smell
Odor Threshold
---
Ph
8-9
Melting Point
---
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
Above 50C
Solubility
Soluble in water
Partition Coefficient
---
Solubility In Water
Soluble in water
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

This product is considered stable under normal ambient storage and handling conditions of temperature and pressure. Once opened, keep dry to maintain stability.

Reactivity

Upon reaction with water, this product liberates Peracetic acid and acetic acid. No specific reactivity hazards associated with this product are known.

Hazardous reactions

This product generates Peracetic acid, which is considered to be corrosive

Avoid

Heat, light, humidity and ignition sources.

Incompatible

Keep dry product away from combustible materials and water.

Decomposition

Product reacts with water to produce peracetic acid, hydrogen peroxide and acetic acid. These substances break down rapidly and do not persist in the environment.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Disposal must be in accordance with current national and local regulations. The environmental and health hazards of the powder product may be reduced by hydrolysis with a large excess of water.

Disposal

In the Healthcare Industry, chemical residues, biocides and infectious substances generated as a result of medical and nursing care may require classification as hazardous waste.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Clinell Peracetic Acid Wipes?

The signal word is danger.

What is the physical form of Clinell Peracetic Acid Wipes?

Clinell Peracetic Acid Wipes is a non-woven wipe containing solid powder particles with wipe containing white powder particles color. It has slight vinegar smell odor.

What is the solubility of Clinell Peracetic Acid Wipes?

Soluble in water

What is Clinell Peracetic Acid Wipes used for?

Surface disinfection and cleaning of non-invasive medical devices

What are the hazard statements for Clinell Peracetic Acid Wipes?

This substance has 1 hazard statement:

  • H318: Causes serious eye damage