Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- neodisher LaboClean A 8
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
PC35 Washing and cleaning products (including solvent based products)
Manufacturers & Suppliers
Chemische Fabrik Dr. Weigert GmbH & Co. KG
manufacturer
Mühlenhagen 85 D-20539 Hamburg
+49 40 789 60 0
http://www.drweigert.com
Emergency Contacts
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| disodium metasilicate pentahydrate EC: 229-912-9 | 10213-79-3 | 10 - 25% | Yes |
| sodium hydroxide EC: 215-185-5 | 1310-73-2 | 10 - 25% | Yes |
| Sodium carbonate EC: 207-838-8 | 497-19-8 | 1 - 10% | Yes |
| troclosene sodium EC: 220-767-7 | 2893-78-9 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air. When dust is intensively inhaled, seek medical help immediately.
Wash off immediately with soap and water. Take medical treatment.
Separate eyelids, wash the eyes thoroughly with water (15 min.). Summon a doctor immediately.
If swallowed, seek medical advice immediately and show this container or label. Rinse mouth thoroughly with water. Let plenty of water be drunk in small gulps. Do not induce vomiting.
Immediate Medical Attention
When dust is intensively inhaled, seek medical help immediately. Take medical treatment for skin contact. Summon a doctor immediately for eye contact. If swallowed, seek medical advice immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product itself is non-combustible; adapt fire extinguishing measures to surrounding areas.
Full water jet
In case of combustion evolution of dangerous gases possible.
Firefighter Protection
In case of combustion use a suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin, eyes and clothing.
Do not discharge into the drains/surface waters/groundwater. Knock down dust with water spray jet.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid the formation and deposition of dust. Keep container tightly closed.
Keep in original packaging, tightly closed.
The product is not combustible.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant gloves Use: Permanent hand contact Appropriate Material: neoprene Material thickness: >= 0,65 mm Breakthrough time: > 480 min Appropriate Material: butyl Material thickness: >= 0,7 mm Breakthrough time: > 480 min Appropriate Material: nitrile Material thickness: >= 0,4 mm Breakthrough time: > 480 min Use: Short-term hand contact Appropriate Material: nitrile Material thickness: >= 0,11 mm Hand protection must comply with EN 374.
Safety glasses with side protection shield; Eye protection must comply with EN 166.
Use breathing apparatus in dust-laden atmosphere. Particle filter P2
Clothing as usual in the chemical industry.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No hazardous reactions known.
No hazardous reactions when stored and handled according to prescribed instructions.
No hazardous reactions known.
Evolution of chlorine under influence of acids. Strong exothermic reaction with acids.
Irritant gases/vapours
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
not determined
12.3. Bioaccumulative potential
not determined
12.4. Mobility in soil
not determined
12.5. Results of PBT and vPvB assessment
The product contains no PBT or vPvB substances.
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Allocation of a waste code number, according to the European Waste Catalogue (EWC), should be carried out in agreement with the regional waste disposal company.
Allocation of a waste code number, according to the European Waste Catalogue (EWC), should be carried out in agreement with the regional waste disposal company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1759
- Shipping Name
- CORROSIVE SOLID, N.O.S. (sodium hydroxide, troclosene sodium)
- Transport Class
- 8
- Packing Group
- II
See Sections 6 to 8
See Sections 6 to 8
See Sections 6 to 8
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Ingredients (Regulation (EC) No 648/2004): 15 % or over but less than 30 %: phosphates. Further ingredients: chlorine-based bleaching agents.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for neodisher LaboClean A 8?
The signal word is danger.
What is the physical form of neodisher LaboClean A 8?
neodisher LaboClean A 8 is a solid with white color. It has characteristic odor.
What is the solubility of neodisher LaboClean A 8?
not determined
What is neodisher LaboClean A 8 used for?
PC35 Washing and cleaning products (including solvent based products)
What are the hazard statements for neodisher LaboClean A 8?
This substance has 4 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- H335: May cause respiratory irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of neodisher LaboClean A 8?
The melting point is not determined and the boiling point is not determined.