NextSDS Logo
Safety Data Sheet EN

neodisher MediClean advanced

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
neodisher MediClean advanced

Regulatory Identifiers

CAS Number
N/A

Identified Uses

PC35 Washing and cleaning products (including solvent based products)

Manufacturers & Suppliers

Chemische Fabrik Dr. Weigert GmbH & Co. KG logo

Chemische Fabrik Dr. Weigert GmbH & Co. KG

manufacturer

Mhlenhagen 85 D-20539 Hamburg

+49 40 789 60 0

www.drweigert.com

Emergency Contacts

Emergency Contact

112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
isopropanolamine EC: 201-162-7 78-96-6 1 - 10% Yes
Trisodium 2(carboxylatomethyl(2hydroxyethyl)amino)ethyliminodi(acetate) EC: 205-381-9 139-89-9 1 - 10% Yes
ALCOOLS EN C12-15 RAMIFIS ET LINAIRES, THOXYLS PROPOXYLS EC: 639-733-1 120313-48-6 0.1 - 1% Yes
Protease EC: 232-752-2 9014-01-1 0.1 - 1% Yes
Natrium-N-lauroyIsarkosinat EC: 205-281-5 137-16-6 0.1 - 1% Yes
2,2',2"-nitrilotriethanol EC: 203-049-8 102-71-6 10 - 25% Yes
1,2 Propyleenglycol EC: 200-338-0 57-55-6 1 - 10% No

Complete text of hazard statements in chapter 16

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Ensure supply of fresh air. In the event of symptoms take medical treatment.

Skin contact

After contact with skin, wash immediately with plenty of water. Consult a doctor if skin irritation persists.

Eye contact

In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. In case of irritation consult an oculist.

Ingestion

Rinse mouth thoroughly with water.

Immediate Medical Attention

In the case of swallowing with subsequent vomiting, aspiration of the lungs can occur which can lead to chemical pneumonia or asphyxiation.

Medical Treatment

In the case of swallowing with subsequent vomiting, aspiration of the lungs can occur which can lead to chemical pneumonia or asphyxiation.

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Chemical resistant gloves. For permanent hand contact: neoprene (material thickness >= 0,65 mm, breakthrough time > 480 min), nitrile (material thickness >= 0,4 mm, breakthrough time > 480 min), or butyl (material thickness >= 0,7 mm, breakthrough time > 480 min). For short-term hand contact: nitrile (material thickness >= 0,11 mm). Hand protection must comply with EN 374.

Eyes

Safety glasses with side protection shield; Eye protection must comply with EN 166.

Respiratory

Not necessary, but do not inhale vapours. If workplace limits are exceeded, a respiratory protection approved for this particular job must be worn.

Skin/Body

Clothing as usual in the chemical industry.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Water
soluble
Crystallisation Point
---
Relative Density
1,14 g/cm Temperature 20 C
Freezing Point
not determined
Auto Ignition Temperature
Not applicable
Colour Intensity
---
Evaporation Rate
not determined
Molecular Weight
---
Odor Threshold
not determined
Bulk Density
---
Flammability
Not applicable
Boiling Point
not determined
State Under Standard Conditions
---
Form
---
Dynamic Viscosity
---
Lower Explosive Limit
Not applicable
Partition Coefficient
not determined
Properties Status
---
Softening Point
---
Upper Explosive Limit
Not applicable
Vapor Pressure
not determined
Metal Corrosion
---
Density
1,14 g/cm at 20 C
Decomposition Temperature
not determined
Odor
characteristic
Melting Point
not determined
Solubility
not determined
Solidification Point
---
Kinematic Viscosity
< 10 mm/s at 20 C
Physical State Data
liquid
Vapor Density
---
Relative Evaporation Rate
---
Ph
10,6 at 20 C
Colour
yellowish
Solubility In Fat
---
Explosive Limits
---
Flash Point
Not applicable
Cloud Point
---
Physical State
liquid, clear
Voc Content
---
Appearance
---
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for neodisher MediClean advanced?

The signal word is danger.

What is the physical form of neodisher MediClean advanced?

neodisher MediClean advanced is a liquid, clear with yellowish color. It has characteristic odor.

What is the solubility of neodisher MediClean advanced?

not determined

What is neodisher MediClean advanced used for?

PC35 Washing and cleaning products (including solvent based products)

What are the hazard statements for neodisher MediClean advanced?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.

What is the melting point of neodisher MediClean advanced?

The melting point is not determined and the boiling point is not determined.

Compliance Scan

Free compliance check