Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices (CA2C200)
- Product Code
- CA2C200
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Disinfection of non-invasive medical devices
Manufacturers & Suppliers
GAMA Healthcare Ltd
manufacturer
Unit 2, The Exchange, Brent Cross Gardens, London NW4 3RJ, United Kingdom
+44 (0) 845 2011 644
Emergency Contacts
Emergency Contact
+44 (0) 207 9930 035
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 68 - 75% | Yes |
| Chlorhexidine digluconate EC: 242-354-0 | 18472-51-0 | 2 - 2.5% | Yes |
| Water | --- | 22.5 - 30% | No |
Notes
For the full test of all R-Phrases and Hazard Statements are available in Section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove patient from exposure and give fresh air and rest. Obtain prompt medical attention.
Symptoms: Irritation of the airways, drowsiness, or dizziness
Remove contaminated clothing and wash affected area with soap and water. Launder contaminated clothing before re-use.
Symptoms: Irritation
Irrigate with water for 15 minutes, occasionally lifting eyelids. Seek prompt medical attention for signs of irritation.
Symptoms: May cause eye damage
Wash out mouth thoroughly and give water to drink. Seek medical attention if significant amounts (eg more than a teaspoonful) are ingested, or for any symptoms occurring after ingestion. Do not induce vomiting, unless instructed by medical personnel.
Immediate Medical Attention
Obtain prompt medical attention for inhalation, eye irritation, or if significant amounts (eg more than a teaspoonful) are ingested, or for any symptoms occurring after ingestion.
Medical Treatment
Treat symptoms as they occur.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide, dry chemical and foam are compatible with the product.
The liquid is expected to be flammable. Vapour may produce explosive mixture in air in confined space.
Remove containers from fire or cool them with water.
Firefighter Protection
Fire fighters should wear an approved self-contained breathing apparatus and full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop the source of leak or release. Ensure all sources of ignition are extinguished. Keep unauthorised personnel from the spillage area.
Small spills can be mopped up with dry cloth.
Collect larger spill using techniques such as sorbent materials or pumping. Follow prescribed procedures for responding to large spills and reporting to appropriate authorities.
Prevent leakage of product into water-courses or drainage system by diking with sand or other absorbent material. Contact authorities, water company, and waste-water treatment plant as appropriate if significant contamination occurs.
Clean up spill as soon as possible using non-sparking equipment and machinery. Wash contaminated surfaces with water, and collect washings for safe disposal.
Materials: non-sparking equipment and machinery, dry cloth, sorbent materials
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For industrial use of the liquid, avoid contact with skin and eyes. Wear protective clothing as in Section 8.
Store in a cool, dry, well-ventilated place, away from direct sunlight. Do not allow to freeze. Keep container closed when not in use.
Remove sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
For industrial use of the liquid, good general ventilation is recommended. Where exposure limits may be exceeded, local exhaust ventilation may be necessary.
chemical resistant gloves (eg rubber, neoprene, PVC). PPE should be to European (EN) standards. Consult manufacturers concerning breakthrough times
safety goggles. PPE should be to European (EN) standards.
Where more extensive contact may occur, wear suitable protective clothing (eg apron, sleeves, boots). PPE should be to European (EN) standards.
Not available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended handling conditions
Not available
Not available
Sources of ignition (e.g. heat, spark, flame).
Oxidising agents, ammonia, and chlorine. Contact with anionic substance will reduce effectiveness of the product
Not available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
For large-scale industrial use, the liquid should be disposed of by incineration.
Disposal must be in accordance with current national and local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3175
- Shipping Name
- SOLIDS CONTAINING FLAMMABLE LIQUID, N.O.S (contains isopropanol)
- Transport Class
- 4.1
- Packing Group
- II
Not available
Not available
Not available
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Classification and Labelling of Substances and Preparation Dangerous for Supply. Workplace Exposure Limits EH40. Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC and amending Regulation (EC) No 1907/2006 with amendments.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices (CA2C200)?
The signal word is danger.
What is the physical form of Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices (CA2C200)?
Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices (CA2C200) is a moist non-woven wipe appearing as moist non-woven wipe . It has alcohol odor.
What is the solubility of Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices (CA2C200)?
Soluble in water
What is Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices (CA2C200) used for?
Disinfection of non-invasive medical devices
What are the hazard statements for Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices (CA2C200)?
This substance has 1 hazard statement:
- H225: Highly flammable liquid and vapour
What is the melting point of Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices (CA2C200)?
The melting point is -88 to -90°C (propan-2-ol) and the boiling point is 82 to 83°C (propan-2-ol).