NextSDS Logo
Safety Data Sheet EN

Pulastic Basic Clean

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Pulastic Basic Clean
Product Code
000000215112

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For professional users only., Post treatment agent

Manufacturers & Suppliers

S

Sika (NZ) Ltd.

manufacturer

85-91 Patiki Road, Avondale, Auckland AKL 1026

+64 9 820 2900

Emergency Contacts

Emergency Contact

0800 734 607

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit.
Eye Dam.
Aquatic Chronic

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P264 Wash skin thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/ eye protection/ face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor/ physician.
P321 Specific treatment (see supplemental first aid instructions on this label).
P332 + P313 If skin irritation occurs: Get medical advice/ attention.
P362 Take off contaminated clothing and wash before reuse.
P501 Dispose of contents/ container to an approved waste disposal plant.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium sulphate laurylether 68891-38-3 1 - 10% No
propan-2-ol 67-63-0 1 - 10% No
Kerosine (petroleum), hydrodesulfurized; Kerosine — unspecified 64742-81-0 2.5 - 10% No
potassium oleate 143-18-0 1 - 10% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. Consult a physician after significant exposure.

Skin contact

Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician.

Symptoms: Dermatitis, Causes skin irritation.

Eye contact

Immediately flush eye(s) with plenty of water. Remove contact lenses. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

Symptoms: Excessive lachrymation, Causes serious eye damage.

Ingestion

Clean mouth with water and drink afterwards plenty of water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Obtain medical attention.

Immediate Medical Attention

Consult a physician after significant exposure. Obtain medical attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Instructions

Standard procedure for chemical fires.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment. Deny access to unprotected persons.

Environmental

Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities.

Cleanup methods

Soak up with inert absorbent material

Materials: sand, silica gel, acid binder, universal binder, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid exceeding the given occupational exposure limits (see section 8). Do not get in eyes, on skin, or on clothing. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Follow standard hygiene measures when handling chemical products

Storage

Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with local regulations.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.

Fire prevention

Normal measures for preventive fire protection.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

adequate local exhaust ventilation

Hands

Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.

Eyes

Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary.

Respiratory

Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. The filter class for the respirator must be suitable for the maximum expected contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If this concentration is exceeded, self-contained breathing apparatus must be used.

Skin/Body

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Decomposition Temperature
No data available
Voc Content
---
Appearance
liquid
Flash Point
93.3 °C (199.9 °F)
Melting Point
No data available
Physical State
liquid
Lower Explosive Limit
No data available
Crystallisation Point
---
Explosive Limits
---
Vapor Density
---
Solubility In Water
No data available
Upper Explosive Limit
No data available
Molecular Weight
---
Bulk Density
---
Kinematic Viscosity
> 7 mm2/s (40 °C (104 °F))
Colour Intensity
---
Solidification Point
---
Partition Coefficient
No data available
Boiling Point
No data available
Properties Status
---
Relative Evaporation Rate
---
Auto Ignition Temperature
No data available
Physical State Data
liquid
Colour
green
Evaporation Rate
No data available
Solubility
---
Relative Density
---
Dynamic Viscosity
No data available
State Under Standard Conditions
---
Flammability
No data available
Density
ca. 1.03 g/cm3 (20 °C (68 °F))
Form
---
Ph
ca. 8
Odor
characteristic
Metal Corrosion
---
Odor Threshold
No data available
Softening Point
---
Cloud Point
---
Freezing Point
No data available
Solubility In Fat
---
Vapor Pressure
0.01 hPa
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

No hazards to be specially mentioned.

Avoid

No data available

Incompatible

No data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Send to a licensed waste management company.

Disposal

The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Pulastic Basic Clean?

The signal word is danger.

What is the physical form of Pulastic Basic Clean?

Pulastic Basic Clean is a liquid appearing as liquid with green color. It has characteristic odor.

What is Pulastic Basic Clean used for?

For professional users only., Post treatment agent

What are the hazard statements for Pulastic Basic Clean?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of Pulastic Basic Clean?

The melting point is No data available and the boiling point is No data available.