Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium silicate solution 38/40 °Bé, extra pure
- Product Code
- 7561
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- not relevant (mixture)
Identified Uses
Laboratory chemical, Laboratory and analytical use
Uses advised against
Do not use for private purposes (household). Food, drink and animal feedingstuffs.
Manufacturers & Suppliers
Carl Roth GmbH + Co. KG
manufacturer
Schoemperlenstr. 3-5, D-76185 Karlsruhe, Germany
+49 (0) 721 - 56 06 0
http://www.carlroth.de
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Description of the mixture
This product does not meet the criteria for classification in any hazard class according to GHS
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
Rinse skin with water/shower.
Rinse cautiously with water for several minutes. In all cases of doubt, or when symptoms persist, seek medical advice.
Rinse mouth. Call a doctor if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Sodium hydroxide solution 45 %, extra pure
---
Sodium Silicate, ~37%
---
Sodium bisulphite solution ≥37 %, in water
CAS: 7631-90-5
Sodium bisulphite, Sodium hydrogen sulphite, solution (19-43%)
---
Sodium hydrogen sulfate monohydrate extra pure
---
Sodium Methylate solution 30 %
---
Sodium hydroxide solution 30% Suprapur®
---
Sodium hydrgen carbonate powder, extra pure
CAS: 144-55-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Type of material: NBR (Nitrile rubber). Material thickness: >0,11 mm. Breakthrough times of the glove material: >480 minutes (permeation: level 6).
Use safety goggle with side protection.
Respiratory protection necessary at: Aerosol or mist formation. Usually no personal respirative protection necessary.
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium silicate solution 38/40 °Bé, extra pure?
The signal word is no signal word.
What is the physical form of Sodium silicate solution 38/40 °Bé, extra pure?
Sodium silicate solution 38/40 °Bé, extra pure is a liquid with colourless color. It has odourless odor.
What is the solubility of Sodium silicate solution 38/40 °Bé, extra pure?
miscible in any proportion
What is Sodium silicate solution 38/40 °Bé, extra pure used for?
Laboratory chemical, Laboratory and analytical use
What is the melting point of Sodium silicate solution 38/40 °Bé, extra pure?
The melting point is ~0 C and the boiling point is >100 C.