Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tween® 40 for synthesis
- Product Code
- 822185
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- A registration number is not available for this substance as the substance or its use are exempted from registration according to Article 2 REACH Regulation (EC) No 1907/2006, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.
Identified Uses
Chemical for synthesis
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Germany
+49 6151 72-0
Emergency Contacts
Emergency Contact
+44 870 1906777
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
CAS-No. 9005-66-7
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tween® 40 for synthesis | 9005-66-7 | --- | No |
The Safety Data Sheets for catalogue items are available at www.merckgroup.com
Notes
For the full text of the H-Statements mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
fresh air.
wash off with plenty of water. Remove contaminated clothing.
rinse out with plenty of water.
make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Immediate Medical Attention
No information available.
Medical Treatment
No information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Tween® 80 for synthesis
CAS: 9005-65-6
Tween® 20
CAS: 9005-64-5
o-Xylene for synthesis
CAS: 95-47-6
2-Methyltetrahydrofuran (stabilised) for synthesis
CAS: 96-47-9
PolyTHF® 1000
CAS: 25190-06-1
Methylamine 40 % in water, for synthesis
UFI: Y751-S01M-9003-Y1JV
Triethylene glycol for synthesis
CAS: 112-27-6
2-Ethoxyethanol (stabilised) for synthesis
CAS: 110-80-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.
full contact: Glove material: Nitrile rubber, Glove thickness: 0.11 mm, Break through time: - 480 min. splash contact: Glove material: Nitrile rubber, Glove thickness: 0.11 mm, Break through time: - 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril L (full contact), KCL 741 Dermatril L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Safety glasses
Not required; except in case of aerosol formation.
Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tween® 40 for synthesis?
The signal word is no signal word.
What is the physical form of Tween® 40 for synthesis?
Tween® 40 for synthesis is a liquid with yellow color. It has no strong odour known. odor.
What is Tween® 40 for synthesis used for?
Chemical for synthesis
What is the melting point of Tween® 40 for synthesis?
The melting point is No information available. and the boiling point is - 100 C.