Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HHS 2000 500ml
- Product Code
- 0893 106
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant Professional use product
Manufacturers & Suppliers
Wurth UK Ltd
1 Centurion Way Erith, Kent
+44 (0)3300 555 444
Emergency Contacts
Emergency Contact
+44 (0)870 190 6777
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
GHS02
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N/A | --- | 30 - 50% | Yes |
Notes
For explanation of abbreviations see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical attention if symptoms occur.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Symptoms: Causes skin irritation.
Flush eyes with water as a precaution. Get medical attention if irritation develops and persists.
If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.
Immediate Medical Attention
Treat symptomatically and supportively.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
CU-800 - 300 ML
UFI: HCM8-9049-0002-QJ25
CM pre-fill Standard T/V 190ml
---
COLORMATIC PRE-FILL STANDARD 275 ML
---
COLORMARK LINEMARKER ORANGE 500 ML
---
COLORMARK LINEMARKER BLUE 500 ML
---
COLORMARK LINEMARKER YELLOW 500 ML
---
MSTFA, 1x100 mL
---
COLORMARK LINEMARKER WHITE 500 ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Minimize workplace exposure concentrations. Use only in an area equipped with explosion-proof exhaust ventilation if advised by assessment of the local exposure potential Use with local exhaust ventilation.
Material : Nitrile rubber Break through time : 480 min Glove thickness : 0.45 mm Remarks : Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer. Wash hands before breaks and at the end of workday.
Wear the following personal protective equipment: Safety glasses
Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. Filter type : Self-contained breathing apparatus
Select appropriate protective clothing based on chemical resistance data and an assessment of the local exposure potential. Wear the following personal protective equipment: Flame retardant antistatic protective clothing, unless assessment demonstrates that the risk of explosive atmospheres or flash fires is low Skin contact must be avoided by using impervious protective clothing (gloves, aprons, boots, etc).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1950
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HHS 2000 500ml?
The signal word is danger.
What is the physical form of HHS 2000 500ml?
HHS 2000 500ml is a aerosol containing a liquefied gas appearing as aerosol containing a liquefied gas with brown color. It has solvent-like odor.
What is HHS 2000 500ml used for?
Lubricant Professional use product
What are the hazard statements for HHS 2000 500ml?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of HHS 2000 500ml?
The melting point is No data available and the boiling point is -40 C.