Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CU-800 - 300 ML
- Product Code
- 0893800
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- HCM8-9049-0002-QJ25
Identified Uses
Anti-friction agent and lubricant Professional use product
Uses advised against
Not applicable
Manufacturers & Suppliers
Adolf Wuerth GmbH & Co. KG
global supplier
Reinhold-Wrth-Str. 12-17 74653 Knzelsau
+49 794015 0
Emergency Contacts
Emergency Contact
+49 (0)6132 84463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical attention if symptoms occur.
In case of contact, immediately flush skin with plenty of water. Get medical attention if symptoms occur.
Flush eyes with water as a precaution. Get medical attention if irritation develops and persists.
Symptoms: irritation develops and persists
If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.
Immediate Medical Attention
Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Minimize workplace exposure concentrations. If sufficient ventilation is unavailable, use with local exhaust ventilation. If advised by assessment of the local exposure potential, use only in an area equipped with explosion-proof exhaust ventilation.
Material : butyl-rubber Break through time : >= 480 min Glove thickness : 0,6 mm Material : Viton Break through time : >= 480 min Glove thickness : 0,6 mm Remarks : Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer. Wash hands before breaks and at the end of workday.
Please follow all applicable local/national requirements when selecting protective measures for a specific workplace. Wear the following personal protective equipment: Safety glasses Always wear eye protection when the potential for inadvertent eye contact with the product cannot be excluded. Equipment should conform to DIN EN 166
If adequate local exhaust ventilation is not available or exposure assessment demonstrates exposures outside the recommended guidelines, use respiratory protection. Equipment should conform to DIN EN 14387 Filter type : Combined particulates, organic gas and low boiling vapour type (AX-P)
Wear the following personal protective equipment: If assessment demonstrates that there is a risk of explosive atmospheres or flash fires, use flame retardant antistatic protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Packing Group
- Not assigned by regulation
The transport classification(s) provided herein are for informational purposes only, and solely based upon the properties of the unpackaged material as it is described within this Safety Data Sheet. Transportation classifications may vary by mode of transportation, package sizes, and variations in regional or country regulations.
The transport classification(s) provided herein are for informational purposes only, and solely based upon the properties of the unpackaged material as it is described within this Safety Data Sheet. Transportation classifications may vary by mode of transportation, package sizes, and variations in regional or country regulations.
The transport classification(s) provided herein are for informational purposes only, and solely based upon the properties of the unpackaged material as it is described within this Safety Data Sheet. Transportation classifications may vary by mode of transportation, package sizes, and variations in regional or country regulations.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CU-800 - 300 ML?
The signal word is danger.
What is the physical form of CU-800 - 300 ML?
CU-800 - 300 ML is a aerosol containing a liquefied gas with copper color. It has characteristic odor.
What is CU-800 - 300 ML used for?
Anti-friction agent and lubricant Professional use product
What are the hazard statements for CU-800 - 300 ML?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of CU-800 - 300 ML?
The melting point is No data available and the boiling point is -44 C.