NextSDS Logo
Safety Data Sheet EN

SUMA REVOFLOW PERFECT A17

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SUMA REVOFLOW PERFECT A17

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Rinse aid

Uses advised against

Uses other than those identified are not recommended

Manufacturers & Suppliers

Diversey Australia Pty. Limited logo

Diversey Australia Pty. Limited

undefined

29 Chifley St, Smithfield, NSW, 2164, Australia

1800 647 779

http://www.sealedair.com/

Emergency Contacts

Emergency Contact

1800 033 111

24hrs

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin and serious eye irritation.
H319 Causes skin and serious eye irritation.

Precautionary Statements

P264 Wash face, hands and any exposed skin thoroughly after handling.
P280 Wear protective gloves.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment (see supplemental first aid instructions on this label).
P332+P313 If skin irritation occurs: Get medical advice or attention.
P362 Take off contaminated clothing.
P501 Dispose of unused content as chemical waste.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixtures

Non-hazardous ingredients are the remainder and add up to 100%.

Chemical Name CAS Number Concentration Hazardous
Alcohols, C13-15-branched and linear, butoxylated ethoxylated (monomethyl- and monoethyl-branching/BuO=2,EO=5) EC: 601-137-4 111905-53-4 3 - 10% Yes
Alcohols, C13-15-branched and linear, butoxylated ethoxylated (monomethyl- and monoethyl-branching/BuO=2,EO=5) EC: 601-137-4 111905-53-4 --- Yes
GLUTARALDEHYDE EC: 203-856-5 111-30-8 --- Yes

Notes

For the full text of the H phrases mentioned in this Section, see Section 16. Workplace exposure limit(s), if available, are listed in subsection 8.1.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Get medical attention or advice if you feel unwell.

Symptoms: No known effects or symptoms in normal use.

Skin contact

Wash skin with plenty of lukewarm, gently flowing water. If skin irritation occurs: Get medical advice or attention.

Symptoms: Causes irritation.

Eye contact

Immediately rinse eyes cautiously with lukewarm water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.

Symptoms: Causes severe irritation.

Ingestion

Rinse mouth. Immediately drink 1 glass of water. Get medical attention or advice if you feel unwell.

Symptoms: No known effects or symptoms in normal use.

Immediate Medical Attention

Call Poison Information Center: 13 11 26 (Australia Wide). Get medical attention or advice if you feel unwell or if irritation persists.

Medical Treatment

No information available on clinical testing and medical monitoring. Specific toxicological information on substances, if available, can be found in section 11.

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If the product is diluted by using specific dosing systems with no risk of splashes or direct skin contact, the personal protection equipment as described in this section is not required.

Hands

Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: >= 480 min Material thickness: >= 0.7 mm Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: >= 30 min Material thickness: >= 0.4 mm In consultation with the supplier of protective gloves a different type providing similar protection may be chosen.

Eyes

Safety glasses are not normally required. However, their use is recommended in those cases where splashes may occur when handling the product.

Respiratory

No special requirements under normal use conditions.

Skin/Body

No special requirements under normal use conditions.

Environmental

No special requirements under normal use conditions.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Clear, Blue
Colour Intensity
---
Form
---
Odor
Product specific
Odor Threshold
Not applicable
Ph
7 (neat)
Melting Point
Not determined
Boiling Point
Not determined
Flash Point
Not applicable.
Freezing Point
Not determined
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Vapor Pressure
Not determined
Vapor Density
Not determined
Relative Density
1.023 g/cm (20 C)
Bulk Density
---
Density
---
Flammability
Not determined
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
Not applicable.
Solubility
---
Partition Coefficient
---
Solubility In Water
Fully miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
Not corrosive
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SUMA REVOFLOW PERFECT A17?

The signal word is warning.

What is the physical form of SUMA REVOFLOW PERFECT A17?

SUMA REVOFLOW PERFECT A17 is a liquid with clear, blue color. It has product specific odor.

What is SUMA REVOFLOW PERFECT A17 used for?

Rinse aid

What are the hazard statements for SUMA REVOFLOW PERFECT A17?

This substance has 2 hazard statements:

  • H315: Causes skin and serious eye irritation.
  • H319: Causes skin and serious eye irritation.

What is the melting point of SUMA REVOFLOW PERFECT A17?

The melting point is Not determined and the boiling point is Not determined.

Compliance Scan

Free compliance check