FLUXO R175

In the event of massive inhalation of dust, remove the person exposed to fresh air. Keep warm and at rest. If the person is unconscious, place in recovery position. If breathing is irregular or has stopped, effect mouth-to-mouth resuscitation and call a doctor.

Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner. Watch out for any remaining product between skin and clothing, watches, shoes, etc.

Symptoms: allergic reaction

Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.

Symptoms: redness, pain or visual impairment

Seek medical attention, showing the label.

A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health. Do not breathe in smoke.

Keep packages cool when in the vicinity of flames.

If a large quantity has been spilt, evacuate all personnel and only allow intervention by trained operators equipped with safety apparatus.

evacuate all personnel and only allow intervention by trained operators equipped with safety apparatus

Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums for waste disposal. Prevent any material from entering drains or waterways.

Retrieve the product by mechanical means (sweeping/vacuuming).

Always wash hands after handling. Remove and wash contaminated clothing before re-using. Avoid inhaling vapors. Avoid eye contact with this mixture. No smoking, eating or drinking in areas where the mixture is used.

Keep packages tightly closed and away from sources of heat, sparks and naked flames.

Always wash hands after handling. Remove and wash contaminated clothing before re-using. No smoking, eating or drinking in areas where the mixture is used.

Handle in well-ventilated areas. Prevent the formation of flammable or explosive concentrations in air and avoid vapor concentrations higher than the occupational exposure limits. Prevent the accumulation of electrostatic charges with connections to earth. Use the mixture in premises free of naked flames or other sources of ignition. Keep packages tightly closed and away from sources of heat, sparks and naked flames. Do not use tools which may produce sparks. Do not smoke.

Ensure that there is adequate ventilation, especially in confined areas.

Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question : other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required.

Avoid contact with eyes. Use eye protectors designed to protect against liquid splashes. Before handling, wear safety goggles with protective sides accordance with standard EN166. In the event of high danger, protect the face with a face shield. Prescription glasses are not considered as protection. Individuals wearing contact lenses should wear prescription glasses during work where they may be exposed to irritant vapours. Provide eyewash stations in facilities where the product is handled constantly.

Avoid inhaling vapors. If the ventilation is insufficient, wear appropriate breathing apparatus. When workers are confronted with concentrations that are above occupational exposure limits, they must wear a suitable, approved, respiratory protection device. Anti-gas and vapour filter(s) (Combined filters) in accordance with standard EN14387 : AX. Particle filter according to standard EN143 : P1 (White)

Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.

This mixture is stable under the recommended handling and storage conditions in section 7.

No data available.

No data available.

Any apparatus likely to produce a flame or to have a metallic surface at high temperature (burners, electric arcs, furnaces etc.) must not be allowed on the premises. Avoid : - heating - heat - formation of dusts.

No data available.

carbon monoxide (CO), carbon dioxide (CO2)