Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Suma Bac D10
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For professional and industrial use only. AISE-P314 - Surface disinfectant. Manual process AISE-P315 - Surface disinfectant. Spray and rinse manual process AISE-P301 - General purpose cleaner. Manual process AISE-P302 - General purpose cleaner. Spray and wipe manual process Disinfectant for closed systems or equipment (AISE_CSP02 & AISE_CSP05)
Uses advised against
Uses other than those identified are not recommended
Manufacturers & Suppliers
Diversey Ltd
distributor
Weston Favell Centre, Northampton NN3 8PD, United Kingdom
01604 405311
Diversey Europe Operations BV
manufacturer
Maarssenbroeksedijk 2, 3542DN Utrecht, The Netherlands
Emergency Contacts
Emergency Contact
0800 052 0185
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| alkyldimethylbenzylammoniumchloride EC: 270-325-2 | 68424-85-1 | 3 - 10% | Yes |
| alkyl alcohol ethoxylate | 69011-36-5 | 3 - 10% | Yes |
| sodium carbonate EC: 207-838-8 | 497-19-8 | 1 - 3% | Yes |
For the full text of the H and EUH phrases mentioned in this Section, see Section 16.
Notes
Workplace exposure limit(s), if available, are listed in subsection 8.1. [1] Exempted: ionic mixture. See Regulation (EC) No 1907/2006, Annex V, paragraph 3 and 4. This salt is potentially present, based on calculation, and included for classification and labelling purposes only. Each starting material of the ionic mixture is registered, as required. [2] Exempted: included in Annex IV of Regulation (EC) No 1907/2006. [3] Exempted: Annex V of Regulation (EC) No 1907/2006.
First Aid Measures
Emergency procedures for chemical exposure incidents
Get medical attention or advice if you feel unwell.
Symptoms: No known effects or symptoms in normal use.
Wash skin with plenty of lukewarm, gently flowing water. Take off immediately all contaminated clothing and wash it before re-use. If skin irritation occurs: Get medical advice or attention.
Symptoms: Causes irritation.
Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: Causes severe or permanent damage.
Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Get medical attention or advice if you feel unwell.
Symptoms: No known effects or symptoms in normal use.
Immediate Medical Attention
Immediately call a POISON CENTRE, doctor or physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.
No special hazards known.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drainage system, surface or ground water. Do not allow to enter the ground/soil. Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Use personal protective equipment as required. Avoid contact with eyes. Use only with adequate ventilation.
Store in accordance with local and national regulations. Store in a closed container. Keep only in original container. Keep from freezing.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse.
No special precautions required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Undiluted: If the product is diluted by using specific dosing systems with no risk of splashes or direct skin contact, the personal protection equipment as described in this section is not required. Diluted: No special requirements under normal use conditions.
Undiluted: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: >= 480 min Material thickness: >= 0.7 mm. Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: >= 30 min Material thickness: >= 0.4 mm. In consultation with the supplier of protective gloves a different type providing similar protection may be chosen. Diluted: For prolonged contact protection for the skin may be necessary.
Undiluted: Safety glasses or goggles (EN 166). Diluted: No special requirements under normal use conditions.
No special requirements under normal use conditions.
No special requirements under normal use conditions.
Undiluted: Should not reach sewage water or drainage ditch undiluted or unneutralised. Diluted: No special requirements under normal use conditions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and use conditions.
No reactivity hazards known under normal storage and use conditions.
No hazardous reactions known under normal storage and use conditions.
None known under normal storage and use conditions.
Reacts with acids.
None known under normal storage and use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
Impact on sewage plants - toxicity to bacteria
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.2 Persistence and degradability
12.2 Persistence and degradability
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The concentrated contents or contaminated packaging should be disposed of by a certified handler or according to the site permit.
The concentrated contents or contaminated packaging should be disposed of by a certified handler or according to the site permit.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3267
- Shipping Name
- Corrosive liquid, basic, organic, n.o.s. ( trisodium citrate , alkyldimethylbenzylammoniumchloride )
- Transport Class
- 8
- Packing Group
- III
None known.
None known.
None known.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
EU regulations: Regulation (EC) No. 1907/2006 - REACH, Regulation (EC) No 1272/2008 - CLP, Regulation (EC) No. 648/2004 - Detergents regulation, Regulation (EU) No 528/2012 on biocidal products
Ingredients according to EC Detergents Regulation 648/2004: non-ionic surfactants 5 - 15%, disinfectants. The surfactant(s) contained in this preparation complies(comply) with the biodegradability criteria as laid down in Regulation (EC) No. 648/2004 on detergents.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Suma Bac D10?
The signal word is danger.
What is the physical form of Suma Bac D10?
Suma Bac D10 is a liquid with clear, purple color. It has product specific odor.
What is the solubility of Suma Bac D10?
Fully miscible
What is Suma Bac D10 used for?
For professional and industrial use only. AISE-P314 - Surface disinfectant. Manual process AISE-P315 - Surface disinfectant. Spray and rinse manual process AISE-P301 - General purpose cleaner. Manual process AISE-P302 - General purpose cleaner. Spray and wipe manual process Disinfectant for closed systems or equipment (AISE_CSP02 & AISE_CSP05)
What are the hazard statements for Suma Bac D10?
This substance has 4 hazard statements:
- H290: May be corrosive to metals.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Suma Bac D10?
The melting point is Not determined and the boiling point is Not determined.