NextSDS Logo
Safety Data Sheet EN

Suma®Grill D9

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Suma®Grill D9
Product Code
MS0800172

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial/Institutional; Oven and Grill Cleaner; This product is intended to be used neat.

Uses advised against

Uses other than those identified are not recommended

Manufacturers & Suppliers

D

Diversey, Inc.

manufacturer

1300 Altura Rd., Suite 125 Fort Mill, SC 29708

1-888-352-2249

D

Diversey Canada, Inc.

manufacturer

6150 Kennedy Road Unit 3 Mississauga, Ontario L5T 2J4

1-800-668-7171

Emergency Contacts

Emergency Contact

1-800-851-7145

Emergency Contact

1-651-917-6133

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1B
Eye Dam. Cat. 1
Met. Corr. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
CAUSES SEVERE SKIN BURNS AND SERIOUS EYE DAMAGE.
Causes burns/ serious damage to mouth, throat and stomach.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium hydroxide 1310-73-2 5 - 10% Yes
2-(2-ethoxyethoxy)ethanol 111-90-0 5 - 10% Yes
D-Glucopyranose, oligomers, decyl octyl glycosides 68515-73-1 0.5 - 1.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing.

Skin contact

Take off immediately all contaminated clothing. Rinse skin with water for at least 15 minutes.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes.

Ingestion

Rinse mouth. DO NOT induce vomiting unless directed to do so by medical personnel. Drink a cupful of milk or water.

Immediate Medical Attention

Not applicable.

Medical Treatment

Not applicable.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

The product is not flammable. Extinguish fire using agent suitable for surrounding fire.

Unsuitable media

The product is not flammable.

Specific hazards

Corrosive material (See sections 8 and 10).

Instructions

Specific methods: None known

Firefighter Protection

As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Large spill

Clean-up methods - large spillage. Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Use a water rinse for final clean-up.

Environmental

Clean-up methods - large spillage. Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Use a water rinse for final clean-up.

Cleanup methods

Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Use a water rinse for final clean-up.

Materials: inert material (e.g. dry sand or earth)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Mix only with water. Can react to release hazardous gases. May vigorously react with acids resulting in spattering and excessive heat. Do not mix with other products or chemicals except as directed on the label. Avoid contact with skin, eyes and clothing. Wash thoroughly after handling. Do not taste or swallow. Product residue may remain on/in empty containers. All precautions for handling the product must be used in handling the empty container and residue. Avoid breathing vapors or mists. Use only with adequate ventilation. Remove and wash contaminated clothing and footwear before re-use. Absorb spillage to prevent material damage. ALWAYS WEAR LONG CHEMICAL-RESISTANT GLOVES, CHEMICAL-SPLASH GOGGLES AND PROTECTIVE FOOTWEAR WHEN SPRAYING AND WIPING. Do not spray toward face. Wash hands and arms after use. Do not spray on or let spray contact pilot light, electrical connections, switches, light bulbs, heating elements, receptacles, or thermostats. Spray may cause electric short. Do not let product contact floor coverings, linoleum, aluminum, copper, chrome, painted surfaces or plastics. Do not use on continuous or self-cleaning ovens. Do not mix with any other product or chemical. May vigorously react with acids resulting in spattering and excessive heat. FOR COMMERCIAL AND INDUSTRIAL USE ONLY.

Storage

Store in corrosive-resistant container with a resistant inner liner.

Hygiene

Wash thoroughly after handling. Remove and wash contaminated clothing and footwear before re-use. Wash hands and arms after use.

Fire prevention

Do not spray on or let spray contact pilot light, electrical connections, switches, light bulbs, heating elements, receptacles, or thermostats. Spray may cause electric short.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good general ventilation should be sufficient to control airborne levels.

Hands

Long chemical-resistant gloves.

Eyes

Chemical-splash goggles.

Respiratory

No personal protective equipment required under normal use conditions. If aerosols, mists, or vapors are not adequately controlled by ventilation, use appropriate respiratory protection to avoid over-exposure.

Skin/Body

If major exposure is possible, wear suitable protective clothing and footwear.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Appearance
---
Decomposition Temperature
Not determined
Upper Explosive Limit
Not determined
Physical State Data
liquid
Dynamic Viscosity
170 mPa.s
Solubility In Water
---
Cloud Point
---
Explosive Limits
---
Physical State
Liquid
Vapor Pressure
No information available.
Solubility
Completely Soluble
Ph
> 11
Colour Intensity
---
Colour
Clear , Brown
Softening Point
---
Vapor Density
No information available
Metal Corrosion
Metal corrosive
Lower Explosive Limit
Not determined
Odor Threshold
No information available.
Flammability
Not applicable
Flash Point
> 200.12 °F > 93.4 °C
Melting Point
Not determined
Solidification Point
---
Solubility In Fat
---
Form
---
Odor
Surfactant
Auto Ignition Temperature
No information available
Evaporation Rate
No information available
Relative Density
1.12
Bulk Density
No information available
Freezing Point
Not determined
Boiling Point
Not determined
Properties Status
---
State Under Standard Conditions
---
Crystallisation Point
---
Molecular Weight
---
Kinematic Viscosity
170 mPa.s
Voc Content
0.1 %
Density
1.12 Kg/L
Relative Evaporation Rate
---
Partition Coefficient
No information available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Reactivity

Not Applicable

Hazardous reactions

May vigorously react with acids resulting in spattering and excessive heat.

Avoid

None known.

Incompatible

Acids. Strong acids. Do not mix with any other product or chemical unless specified in the use directions.

Decomposition

Oxides of carbon.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

This product, as sold, if discarded or disposed, is a hazardous waste according to Federal regulations (40 CFR 261). Under RCRA, it is the responsibility of the user of the product to determine, at the time of disposal, whether the waste solution meets RCRA criteria for hazardous waste. Dispose in compliance with all Federal, state, provincial, and local laws and regulations.

Waste Codes

D002 Corrosive Waste RCRA
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1824
Shipping Name
SODIUM HYDROXIDE SOLUTION
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Suma®Grill D9?

The signal word is danger.

What is the physical form of Suma®Grill D9?

Suma®Grill D9 is a liquid with clear , brown color. It has surfactant odor.

What is the solubility of Suma®Grill D9?

Completely Soluble

What is Suma®Grill D9 used for?

Industrial/Institutional; Oven and Grill Cleaner; This product is intended to be used neat.

What are the hazard statements for Suma®Grill D9?

This substance has 3 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • CAUSES SEVERE SKIN BURNS AND SERIOUS EYE DAMAGE.
  • Causes burns/ serious damage to mouth, throat and stomach.

What is the melting point of Suma®Grill D9?

The melting point is Not determined and the boiling point is Not determined.

Compliance Scanner

Scan your compliance