Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Solo Smoke Detector Tester
- Product Code
- Solo A3 –XXX
Regulatory Identifiers
- CAS Number
- Mixture Check regulations →
- EC Number
- Mixture Check regulations →
- REACH No.
- None assigned
Identified Uses
Smoke simulation
Uses advised against
None known
Manufacturers & Suppliers
Detectortesters (No Climb Products Ltd)
manufacturer
Edison House, 163 Dixons Hill Road, Welham Green, Hertfordshire. AL9 7JE. United Kingdom
Emergency Contacts
Detectortesters (No Climb Products Ltd)
+44 (0) 1707 282760
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
remove victim to fresh air and keep at rest in a position comfortable for breathing. If symptoms persist, obtain medical attention.
Symptoms: difficulty breathing
Wash with plenty of soap and water.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/ attention.
Symptoms: eye irritation
Immediate Medical Attention
Unlikely to be required but if necessary treat symptomatically.
Medical Treatment
treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation.
Wear suitable gloves if prolonged skin contact is likely. Gloves: Nitrile rubber, NBR.
If eye contact is likely: Wear protective eyewear (goggles, face shield, or safety glasses).
No personal respiratory protective equipment normally required. Handling of larger amounts: In case of insufficient ventilation, wear suitable respiratory equipment. A suitable mask with filter type A (EN14387 or EN405) may be appropriate.
Do not release large quantities into the surface water or into drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.2
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Solo Smoke Detector Tester?
The signal word is warning.
What is the physical form of Solo Smoke Detector Tester?
Solo Smoke Detector Tester is a aerosol appearing as aerosol with colourless color. It has characteristic odor.
What is the solubility of Solo Smoke Detector Tester?
Immiscible with water.
What is Solo Smoke Detector Tester used for?
Smoke simulation
What are the hazard statements for Solo Smoke Detector Tester?
This substance has 2 hazard statements:
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
What is the melting point of Solo Smoke Detector Tester?
The melting point is Not determined and the boiling point is -26 C.