NextSDS Logo
Safety Data Sheet EN

HO-25SA smoke check 150ml

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
HO-25SA smoke check 150ml
Product Form
aerosols

Regulatory Identifiers

CAS Number
N/A

Identified Uses

aerosols

Manufacturers & Suppliers

AEROTRIM N.V. BELGIUM logo

AEROTRIM N.V. BELGIUM

manufacturer

Industrielaan 24, B3900 Overpelt

011642384

http://www.aerotrim.be/

Emergency Contacts

Emergency Contact

003270245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
1,1,5,5,5-hexamethyl-3-phenyl-3-[(trimethylsilyl)oxy]tri siloxane EC: 218-320-6 2116-84-9 5% Yes
Propane EC: 200-827-9 74-98-6 30% Yes
n-Butane (<0,01% Butadiene -1,3) EC: 203-448-7 106-97-8 30% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

let sit upright, fresh air, rest and take to hospital.

Skin contact

remove contaminated clothing, rinse with plenty of water, if necessary seek medical attention.

Eye contact

first prolonged rinsing with water (contact lenses to be removed if this is easily done) then take to physician.

Symptoms: redness

Ingestion

rinse mouth, do not induce vomiting, take to hospital immediately.

Symptoms: diarrhoea, headache, abdominal cramps, sleepiness, vomiting

Immediate Medical Attention

take to physician, take to hospital immediately, take to hospital.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, foam, powder, sprayed water

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.

Environmental

Do not allow to flow into sewers or open water.

Cleanup methods

remove by using absorbent material.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

handle with care to avoid spillage.

Storage

keep in a sealed container in a closed, frost-free, ventilated room.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If necessary, use with sufficient exhaust ventilation.

Hands

handling with nitril-gloves (EN 374). Breakthrough time: >480' Material thickness: 0,35 mm.

Eyes

Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.

Respiratory

respiratory protection is not required. Use ABEK type gas masks in case of irritating exposure.

Skin/Body

impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Upper Explosive Limit
9.500 %
Physical State Data
liquid
Flammability
not applicable
Odor Threshold
not applicable
Flash Point
/
Solubility In Water
not soluble
Boiling Point
-140 °C
Vapor Density
not applicable
Freezing Point
---
Partition Coefficient
not applicable
Metal Corrosion
---
Physical State
liquid
Decomposition Temperature
/
Properties Status
---
Dynamic Viscosity
20 mPa.s
Auto Ignition Temperature
365 °C
Crystallisation Point
---
Relative Density
0.980 kg/l
Explosive Limits
---
Solubility In Fat
---
Evaporation Rate
/
Cloud Point
---
Ph
/
Relative Evaporation Rate
---
Density
---
Lower Explosive Limit
1.800 %
Colour
---
Colour Intensity
---
Odor
characteristic
Vapor Pressure
853 000 Pa
Voc Content
98.00 %
Form
---
State Under Standard Conditions
---
Molecular Weight
---
Appearance
liquid
Softening Point
---
Solidification Point
---
Bulk Density
---
Kinematic Viscosity
20 mm²/s
Solubility
---
Melting Point
/
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

extremely high or low temperatures.

Reactivity

stable under normal conditions.

Avoid

protect from sunlight and do not expose to temperatures exceeding +50°C.

Incompatible

keep away from sources of ignition

Decomposition

doesn't decompose with normal use

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols, flammable
Transport Class
5F
Packing Group
not applicable
ADR

Hazard characteristics: Risk of fire. Risk of explosion. Containments may explode when heated. Additional guidance: Take cover. Keep out of low areas.

IMDG

Hazard characteristics: Risk of fire. Risk of explosion. Containments may explode when heated. Additional guidance: Take cover. Keep out of low areas.

IATA

Hazard characteristics: Risk of fire. Risk of explosion. Containments may explode when heated. Additional guidance: Take cover. Keep out of low areas.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for HO-25SA smoke check 150ml?

The signal word is danger.

What is the physical form of HO-25SA smoke check 150ml?

HO-25SA smoke check 150ml is a liquid appearing as liquid . It has characteristic odor.

What is HO-25SA smoke check 150ml used for?

aerosols

What are the hazard statements for HO-25SA smoke check 150ml?

This substance has 2 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.

What is the melting point of HO-25SA smoke check 150ml?

The melting point is / and the boiling point is -140 °C.