Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Orotol® plus Disinfection of suction system
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Orotol® plus is a highly effective aldehyde-free concentrate for the simultaneous disinfection, deodorization, cleaning and care of dental suction systems as well as spittoon bowls, being likewise suitable for all amalgam separators.
Uses advised against
None, if handled according to order.
Manufacturers & Suppliers
orochemie GmbH + Co. KG
manufacturer
Max-Planck-Straße 27, 70806 Kornwestheim
+49 7154 1308-0
DÜRR DENTAL SE
distributor
Höpfigheimer Str. 17, 74321 Bietigheim-Bissingen, Germany
+49 7142 705-0
DÜRR DENTAL [Products] UK Ltd.
distributor
14 Linnell Way - Telford Way Industrial Estate, Kettering Northants NN16 8PS, United Kingdom
+44 1536 526740
DÜRR DENTAL SE
distributor
PO Box 2067, Woonona East New South Wales 2517, Australia
+61 (0)412 95 95 25
Emergency Contacts
Poisons Information Centre
13 11 26
24 hours a day, 7 days a week
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Orotol [] plus contains quaternary ammonium compounds, alkaline cleaning agents, complexing agents, special antifoaming agents, fragrances and auxiliary agents in aqueous solution.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| TETRAPOTASSIUM DIPHOSPHATE EC: 230-785-7 | 7320-34-5 | 5 - 10% | Yes |
| DIMETHYLDIOCTYLAMMONIUMCHLORIDE EC: 226-901-0 | 5538-94-3 | 3 - 5% | Yes |
| DODECYLDIMETHYLBENZYLAMMONIUM CHLORIDE EC: 287-089-1 | 85409-22-9 | 0.5 - 1% | Yes |
| POTASSIUM HYDROXIDE EC: 215-181-3 | 1310-58-3 | 0.5 - 1% | Yes |
Full text of H- and EUH-phrases: see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In case of respiratory tract irritation, consult a physician.
Wash with plenty of water. When in doubt or if symptoms are observed, get medical advice.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
If swallowed, immediately drink: Water Never give anything by mouth to an unconscious person or a person with cramps. Do NOT induce vomiting. Call a physician immediately.
Immediate Medical Attention
If unconscious place in recovery position and seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation.
Short-term exposure (Level 2: < 30 min): disposable gloves to EN374 category III, e.g. nitrile rubber, material thickness 0.1 mm. Long-term exposure (Level 6: < 480 min): protective gloves to EN374 category III, e.g. nitrile rubber, material thickness 0.7 mm. When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. AUS/NZ: Wear impervious rubber gloves (AS2161).
Eye glasses with side protection DIN EN 166 Use tightly fitting safety glasses as per Australian Standard AS 1336 and AS/NZS 1337. Safety glasses with side shields
Usually no personal respirative protection necessary.
Body protection: not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1719
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Orotol® plus Disinfection of suction system?
The signal word is danger.
What is the physical form of Orotol® plus Disinfection of suction system?
Orotol® plus Disinfection of suction system is a liquid appearing as liquid with yellow color. It has lemon odor.
What is Orotol® plus Disinfection of suction system used for?
Orotol® plus is a highly effective aldehyde-free concentrate for the simultaneous disinfection, deodorization, cleaning and care of dental suction systems as well as spittoon bowls, being likewise suitable for all amalgam separators.
What are the hazard statements for Orotol® plus Disinfection of suction system?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Orotol® plus Disinfection of suction system?
The melting point is not determined and the boiling point is approx. 100 C.