NextSDS Logo
Safety Data Sheet EN

CLEAR LUBE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
CLEAR LUBE

Regulatory Identifiers

CAS Number
N/A
REACH No.
Not applicable (mixture)

Identified Uses

Lubricant

Uses advised against

No uses advised against

Manufacturers & Suppliers

N

Novatio

distributor

Industrielaan 5B, B-2250 Olen

+32 14 25 76 40

N

Novatech International N.V.

manufacturer

Industrielaan 5B, B-2250 Olen

+32 14 85 97 37

Emergency Contacts

BIG

+32 14 58 45 45

24h/24h

EN, FR, DE, NL

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H336
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P280 Wear protective gloves, protective clothing and eye protection/face protection.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 / 122F.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
cyclohexane EC: 203-806-2 110-82-7 5% Yes
n-hexane EC: 203-777-6 110-54-3 5% Yes
hydrocarbons, C6, isoalkanes, <5% n-hexane --- 5 - 15% Yes
hydrocarbons, C7, n-alkanes, isoalkanes, cyclics --- 15 - 30% Yes
propane EC: 200-827-9 74-98-6 5 - 15% Yes
butane EC: 203-448-7 106-97-8 15 - 30% Yes

Notes

Notes: (1) For H-statements in full: see heading 16 (2) Substance with a Community workplace exposure limit (8) Specific concentration limits, see heading 16 (10) Subject to restrictions of Annex XVII of Regulation (EC) No. 1907/2006

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.

Symptoms: EXPOSURE TO HIGH CONCENTRATIONS: Central nervous system depression. Headache. Dizziness. Feeling of weakness.

Skin contact

Wash immediately with lots of water. Take victim to a doctor if irritation persists.

Symptoms: Tingling/irritation of the skin.

Eye contact

Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing. Do not apply neutralizing agents. Take victim to an ophthalmologist if irritation persists.

Symptoms: No effects known.

Ingestion

Rinse mouth with water. Consult a doctor/medical service if you feel unwell.

Symptoms: No effects known.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use spark-/explosionproof appliances and lighting system. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Measure the concentration in the air regularly.

Hands

Protective gloves against chemicals (EN374). Materials: nitrile rubber, Measured breakthrough time: > 480 minutes, Thickness: 0.35 mm, Protection index: Class 6. Good resistance materials: Nitrile rubber.

Eyes

Protective goggles.

Respiratory

Full face mask with filter type A at conc. in air > exposure limit.

Skin/Body

Head/neck protection. Protective clothing.

Environmental

See headings 6.2, 6.3 and 13

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Aerosol
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
---
Colour
No data available on colour
Colour Intensity
---
Form
Aerosol
Odor
Characteristic odour
Odor Threshold
No data available
Ph
No data available
Melting Point
No data available
Boiling Point
60 °C - 95 °C
Flash Point
No data available
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
8530 hPa
Vapor Density
---
Relative Density
0.76
Bulk Density
---
Density
755 kg/m³
Flammability
Extremely flammable aerosol.
Upper Explosive Limit
9.5 vol %
Lower Explosive Limit
1.1 vol %
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
Water; insoluble
Partition Coefficient
Not applicable (mixture)
Solubility In Water
insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
1 mPa.s
Kinematic Viscosity
1 mm²/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for CLEAR LUBE?

The signal word is danger.

What is the physical form of CLEAR LUBE?

CLEAR LUBE is a aerosol with no data available on colour color. It has characteristic odour odor.

What is the solubility of CLEAR LUBE?

Water; insoluble

What is CLEAR LUBE used for?

Lubricant

What are the hazard statements for CLEAR LUBE?

This substance has 5 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H315: Causes skin irritation.
  • H336: May cause drowsiness or dizziness.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of CLEAR LUBE?

The melting point is No data available and the boiling point is 60 °C - 95 °C.