Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DP-LUBRICANT BLUE
- Product Code
- M1201015
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cutting and cooling additive for fine grinding and polishing of materialographic preparations
Manufacturers & Suppliers
Struers A/S
manufacturer
Valhøjs Allé 176 DK-2610 Rødovre
+45 3670 3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
organic solvents and pigments.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethanol EC: 200-578-6 | 64-17-5 | 70 - 85% | Yes |
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 5 - 15% | Yes |
| Ethylene glycol EC: 203-473-3 | 107-21-1 | 5 - 15% | Yes |
| Blue dye EC: 279-766-5 | 81457-64-9 | 0.1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move into fresh air and keep at rest.
Remove contaminated clothes and rinse skin thoroughly with water.
Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyelids widely. If irritation persists: Continue flushing during transport to hospital. Bring along these instructions.
Immediately rinse mouth and drink plenty of water. Keep person under observation. If uncomfortable: Seek hospital and bring along these instructions.
Immediate Medical Attention
Call an ambulance. If irritation persists: Continue flushing during transport to hospital. If uncomfortable: Seek hospital and bring along these instructions.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol-resistant foam, carbon dioxide, dry powder or water fog
Vapours are heavier than air and may travel along the floor and in the bottom of containers. Vapours may be ignited by a spark, a hot surface or an ember. The product is highly flammable, and explosive vapours/air mixtures may be formed even at normal room temperatures.
Firefighter Protection
Use air-supplied respirator during fire fighting.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Large quantities of concentrate should not be discharged into the drain but removed with absorbing material. Do not use sawdust or other combustible material.
Do not discharge into drains, water courses or onto the ground.
removed with absorbing material
Materials: absorbing material (Do not use sawdust or other combustible material)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of vapours and contact with skin and eyes. Observe good industrial hygiene practices.
Store in a cool and well-ventilated place. Avoid contact with oxidizing agents.
Observe good industrial hygiene practices.
Do not smoke or use open fire or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Observe Occupational Exposure Limits and minimize the risk of inhalation of vapours.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
Direct sunlight. Heating.
Oxidizing agents.
None in particular.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S ( Ethanol )
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DP-LUBRICANT BLUE?
The signal word is danger.
What is the physical form of DP-LUBRICANT BLUE?
DP-LUBRICANT BLUE is a liquid appearing as blue liquid with blue color. It has odour of alcohol odor.
What is the solubility of DP-LUBRICANT BLUE?
Miscible with water.
What is DP-LUBRICANT BLUE used for?
Cutting and cooling additive for fine grinding and polishing of materialographic preparations
What are the hazard statements for DP-LUBRICANT BLUE?
This substance has 3 hazard statements:
- H224: The product is highly flammable.
- H315: The liquid may irritate the skin, the eyes and the respiratory tract.
- H372: Organic solvents may be absorbed into the body by inhalation and ingestion and cause permanent damage to the nervous system, including the brain.