Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP HYBRID COLORS WHITE RAL 9010 400 ML
- Product Code
- 304703
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category Paint remover; Process category PROC7 Industrial spraying; PROC11 Non industrial spraying; Application of the substance / the mixture Spray varnish
Manufacturers & Suppliers
European Aerosols B.V .
manufacturer
Wolfraamweg 2 NL-8471 XC Wolvega The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561-694400
09:00h - 17:00h
NPIS National Poisons Information Centre
+44 0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dimethylether (Drijfgas (Arosol)) stof met nationale blootstellingsgrenswaarde(n) op de werkvloer (BE); stof waarvoor binnen de Gemeenschap een blootstellingsgrens op de werkvloer geldt EC: 204-065-8 | 115-10-6 | 50 - 75% | Yes |
| 2-methylpropaan-2-ol EC: 203-539-1 | 107-98-2 | 12.5 - 20% | Yes |
| acetone EC: 200-662-2 | 67-64-1 | 12.5 - 20% | Yes |
| cellulosenitraat (< 12.6% N) | 9004-70-0 | 2.5 - 5% | Yes |
| 2-Butoxyethanol stof met nationale blootstellingsgrenswaarde(n) op de werkvloer (BE, NL); stof waarvoor binnen de Gemeenschap een blootstellingsgrens op de werkvloer geldt EC: 203-905-0 | 111-76-2 | 2.5 - 5% | Yes |
| TiO2 EC: 236-675-5 | 13463-67-7 | 2.5% | Yes |
| isopropanol (isopropyl alcohol) EC: 200-661-7 | 67-63-0 | 2.5% | Yes |
| 2-methoxy-1-methylethyl acetate substance with a Community workplace exposure limit EC: 203-603-9 | 108-65-6 | 2.5% | Yes |
CAS 9004-70-0: GB CLP Note T For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
MOTIP HYBRID COLORS GLOSS PURE WHITE RAL 9003 400 ML
---
MOTIP Industrial Coatings RAL colors 400ml
---
MOTIP HIGH GLOSS WHITE 500 ML
---
MOTIP PRIMER WHITE 500 ML
---
MOTIP PRIMER (Black / Grey / Red / White)
---
MOTIP SEMI GLOSS BLACK 500 ML
---
MOTIP RAL ACRYL SPRAY various colours
---
MOTIP HIGH GLOSS BLACK 500 ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. Material of gloves: Butyl rubber, BR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min, Butyl acetate: 60 min, Ethyl acetate: 170 min, Xylene: 42 min. Butyl rubber gloves with a thickness of 0.4 mm are solvent resistant for 42- 480 minutes. As protective measure, we recommend that users and responsible persons for work safety assume solvent resistance length of 42 minutes. Considering the data in section 3 of this SDS, one can assume longer resistance length in particular cases.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter A2/P3
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP HYBRID COLORS WHITE RAL 9010 400 ML?
The signal word is danger.
What is the physical form of MOTIP HYBRID COLORS WHITE RAL 9010 400 ML?
MOTIP HYBRID COLORS WHITE RAL 9010 400 ML is a aerosol with different according to colouring color. It has nearly odourless odor.
What is MOTIP HYBRID COLORS WHITE RAL 9010 400 ML used for?
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category Paint remover; Process category PROC7 Industrial spraying; PROC11 Non industrial spraying; Application of the substance / the mixture Spray varnish
What are the hazard statements for MOTIP HYBRID COLORS WHITE RAL 9010 400 ML?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of MOTIP HYBRID COLORS WHITE RAL 9010 400 ML?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..