Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- All in One Activator 85086
- Product Code
- 85086
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
FOR PROFESSIONAL AND INDUSTRIAL USE ONLY, Activator
Manufacturers & Suppliers
KENT (United Kingdom) Ltd
manufacturer
Forsyth House, Pitreavie Drive, Pitreavie Business Park, Dunfermline, Fife, KY11 8US
0800 136925
Emergency Contacts
KENT (United Kingdom) Ltd
+44 01383 723344
During normal office hours - Monday - Thursday 8.30am - 5.30pm, Friday 9.00am - 3.00pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with harmless additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Heptane EC: 205-563-8 | 142-82-5 | 75 - 100% | Yes |
| N,N-dimethyl-p-toluidine EC: 202-805-4 | 99-97-8 | 1 - 10% | Yes |
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 1 - 10% | Yes |
| benzothiazole-2-thiol EC: 205-736-8 | 149-30-4 | 1 - 10% | Yes |
| Acetone EC: 200-662-2 | 67-64-1 | 1 - 10% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and call for doctor for safety reasons.
Instantly wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.
Rinse out mouth and then drink plenty of water. Do not induce vomiting; instantly call for medical help.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Wear suitable gloves tested to EN 374. Nitrile rubber, NBR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Value for the permeation: Level 6 480 minutes. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses recommended during refilling.
Only during spraying without adequate removal by suction. Short term filter device: Filter A (EN 14387)
Protective work clothing. (EN-13034/6)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S., SPECIAL PROVISION 640D (HEPTANES, ACETONE), ENVIRONMENTALLY HAZARDOUS
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for All in One Activator 85086?
The signal word is danger.
What is the physical form of All in One Activator 85086?
All in One Activator 85086 is a liquid with colourless color. It has solvent-like odor.
What is All in One Activator 85086 used for?
FOR PROFESSIONAL AND INDUSTRIAL USE ONLY, Activator
What are the hazard statements for All in One Activator 85086?
This substance has 8 hazard statements:
- H225: Highly flammable liquid and vapour.
- H301: Toxic if swallowed.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H336: May cause drowsiness or dizziness.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of All in One Activator 85086?
The melting point is Not determined and the boiling point is 90-104 C.