NextSDS Logo
Safety Data Sheet EN

EEAY051B ACTIVATOR COMPNT

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
EEAY051B ACTIVATOR COMPNT
Product Form
Liquid
Product Code
EEAY051B ACTIVATOR COMPNT

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial applications. Coating.

Uses advised against

Not applicable.

Manufacturers & Suppliers

P

PPG Aerospace PRC-DeSoto

manufacturer

12780 San Fernando Road Sylmar, CA 91342

818 362 6711

Emergency Contacts

Emergency Contact

(412) 434-4515

Emergency Contact

(514) 645-1320

Emergency Contact

01-800-00-21-400

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3
Acute Tox. Cat. 4
Acute Tox. Cat. 4
Skin Corr. Cat. 1B
Eye Dam. Cat. 1
Skin Sens. Cat. 1
Carc. Cat. 2
Repr. Cat. 2
STOT SE Cat. 3
STOT RE Cat. 2

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapor.
H302 + H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H336 May cause drowsiness or dizziness.
H351 Suspected of causing cancer.
H361 Suspected of damaging fertility or the unborn child.
H372 May cause damage to organs through prolonged or repeated exposure. (kidneys)

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P235 Keep cool.
P241 Use explosion-proof electrical, ventilating or lighting equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Do not breathe vapor.
P264 Wash thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing must not be allowed out of the workplace.
P280 Wear protective gloves, protective clothing and eye or face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice or attention.
P310 Immediately call a POISON CENTER or doctor.
P310 Immediately call a POISON CENTER or doctor.
P310 Immediately call a POISON CENTER or doctor.
P330 Rinse mouth.
P331 Do NOT induce vomiting.
P333 + P313 If skin irritation or rash occurs: Get medical advice or attention.
P352 IF ON SKIN: Wash with plenty of water.
P363 Wash contaminated clothing before reuse.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Polyaminoamide 68082-29-1 20 - 50% No
benzyl alcohol 100-51-6 10 - 16% No
Formaldehyde, polymer with benzenamine, hydrogenated 135108-88-2 10 - 20% No
4-methylpentan-2-one 108-10-1 10 - 17% No
cyclohexanone 108-94-1 5 - 10% No
heptan-2-one 110-43-0 5 - 10% No
2,4,6-tris(dimethylaminomethyl)phenol 90-72-2 5 - 8.5% No
benzyldimethylamine 103-83-3 0.1 - 2.7% No
N-(2-aminoethyl)-N'-[3-(trimethoxysilyl)propyl]ethylenediamine 35141-30-1 1 - 5% No
3,6-diazaoctanethylenediamin 112-24-3 1.9% No
salicylic acid 69-72-7 1 - 4.5% No
4,4'-methylenebis(cyclohexylamine) 1761-71-3 1.9% No
bis[(dimethylamino)methyl]phenol 71074-89-0 1 - 5% No
Ethan-1,2-diamine, N-(2-aminoethyl)-N'-3-(trimethoxysilyl)propyl 103526-27-8 1% No
1,2-ethanediamine, N1-(2- aminoethyl)-N2-[3-(trimethoxysilyl)propyl]-, homopolymer 162339-40-4 1% No

Occupational exposure limits, if available, are listed in Section 8.

Notes

Any concentration shown as a range is to protect confidentiality or is due to batch variation. There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.

Symptoms: Harmful if inhaled. Can cause central nervous system (CNS) depression. May cause drowsiness or dizziness. Adverse symptoms may include the following: nausea or vomiting, headache, drowsiness/fatigue, dizziness/vertigo, unconsciousness, reduced fetal weight, increase in fetal deaths, skeletal malformations.

Skin contact

Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognized skin cleanser.

Symptoms: Causes severe burns. Defatting to the skin. May cause an allergic skin reaction. Adverse symptoms may include the following: pain or irritation, redness, dryness, cracking, blistering may occur, reduced fetal weight, increase in fetal deaths, skeletal malformations.

Eye contact

Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Seek immediate medical attention.

Symptoms: Causes serious eye damage. Adverse symptoms may include the following: pain, watering, redness.

Ingestion

If swallowed, seek medical advice immediately and show this container or label. Keep person warm and at rest. Do NOT induce vomiting.

Symptoms: Harmful if swallowed. Corrosive to the digestive tract. Causes burns. Can cause central nervous system (CNS) depression. Adverse symptoms may include the following: stomach pains, reduced fetal weight, increase in fetal deaths, skeletal malformations.

Immediate Medical Attention

Seek immediate medical attention for eye contact. In case of inhalation of decomposition products in a fire, symptoms may be delayed.

Medical Treatment

No specific treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use dry chemical, CO₂, water spray (fog) or foam.

Unsuitable media

Do not use water jet.

Specific hazards

Flammable liquid and vapor. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a subsequent explosion. Vapors may accumulate in low or confined areas or travel a considerable distance to a source of ignition and flash back. Runoff to sewer may create fire or explosion hazard.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Do not breathe vapor or mist. Provide adequate ventilation.

Small spill

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations. Dispose of via a licensed waste disposal contractor.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

Cleanup methods

Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container.

Materials: inert dry material, sand, earth, vermiculite or diatomaceous earth

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment (see Section 8). Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Avoid exposure - obtain special instructions before use. Avoid exposure during pregnancy. Do not handle until all safety precautions have been read and understood. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest.

Storage

Do not store above 50°C (122°F). Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink. Store locked up. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.

Fire prevention

Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use only non-sparking tools. Take precautionary measures against electrostatic discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colorless.
Colour Intensity
---
Form
---
Odor
Not available.
Odor Threshold
Not available.
Ph
Not applicable.
Melting Point
Not available.
Boiling Point
117.22 to 316.11°C (243 to 601°F)
Flash Point
Closed cup: 31.67°C (89°F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Vapor Pressure
Not available.
Vapor Density
Not available.
Relative Density
0.95
Bulk Density
---
Density
7.93 lbs / gal
Flammability
Not available.
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Solubility
---
Partition Coefficient
Not applicable.
Solubility In Water
Partially soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
299 g/l
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Kinematic (40°C (104°F)): >21 mm²/s (>21 cSt)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable.

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

When exposed to high temperatures may produce hazardous decomposition products. Refer to protective measures listed in sections 7 and 8.

Incompatible

Keep away from the following materials to prevent strong exothermic reactions: oxidizing agents, strong alkalis, strong acids.

Decomposition

Depending on conditions, decomposition products may include the following materials: carbon oxides nitrogen oxides Formaldehyde. metal oxide/oxides

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Toxicity

Product/ingredient name | Result | Species | Exposure | | --- | --- | --- | --- | | Formaldehyde, polymer with benzenamine, hydrogenated | Acute EC50 43.94 mg/l | Algae | 72 hours | | | Acute EC50 15.4 mg/l | Daphnia | 48 hours | | | Acute LC50 63 mg/l | Fish | 96 hours |

Toxicity

| Product/ingredient name | Result | Species | Exposure | | --- | --- | --- | --- | | 4-methylpentan-2-one | Acute LC50 >179 mg/l | Fish | 96 hours |

Toxicity

Product/ingredient name: heptan-2-one, Result: Acute LC50 131 mg/l, Species: Fish, Exposure: 96 hours

Toxicity

Toxicity | Product/ingredient name | Result | Species | Exposure | | --- | --- | --- | --- | | 2,4,6-tris (dimethylaminomethyl)phenol | Acute LC50 >100 mg/l | Daphnia | 48 hours |

Toxicity

Toxicity | Product/ingredient name | Result | Species | Exposure | | --- | --- | --- | --- | | salicylic acid | Acute LC50 1147.57 mg/l Fresh water | Fish | 96 hours | | | Chronic NOEC 5.6 mg/l Fresh water | Daphnia - Daphnia longispina - Neonate | 48 hours | | | | Daphnia - Daphnia magna - Neonate | 21 days |

Persistence and degradability

Persistence and degradability | Product/ingredient name | Test | Result | | Dose | | Inoculum | | --- | --- | --- | --- | --- | --- | --- |

Persistence and degradability

Formaldehyde, polymer with benzenamine, hydrogenated | - | 0 % - Not readily - 28 days | | - | | -

Persistence and degradability

| Product/ingredient name | Test | Result | | Dose | | Inoculum | | --- | --- | --- | --- | --- | --- | --- | | 4-methylpentan-2-one | OECD 301F | 83 % - Readily - 28 days | | - | | - |

Persistence and degradability

Persistence and degradability | Product/ingredient name | Test | Result | | Dose | | Inoculum | | --- | --- | --- | --- | --- | --- | --- | | heptan-2-one | OECD 310 | 69 % - Readily - 28 days | | - | | - |

Persistence and degradability

Persistence and degradability | Product/ingredient name | Test | Result | | Dose | | Inoculum | | --- | --- | --- | --- | --- | --- | --- | | 2,4,6-tris (dimethylaminomethyl)phenol | OECD 301D | 4 % - Not readily - 28 days | | - | | - | | | Ready Biodegradability - Closed Bottle Test | | | | | |

Persistence and degradability

| Product/ingredient name | Aquatic half-life | | Photolysis | | Biodegradability | | | benzyl alcohol | - | | - | | Readily | |

Persistence and degradability

Product/ingredient name | Aquatic half-life | | Photolysis | | Biodegradability | | | Formaldehyde, polymer with benzenamine, hydrogenated | - | | - | | Not readily | |

Persistence and degradability

Persistence and degradability | Product/ingredient name | Aquatic half-life | | Photolysis | | Biodegradability | | 4-methylpentan-2-one | - | | - | | Readily | |

Persistence and degradability

Persistence and degradability | Product/ingredient name | Aquatic half-life | | Photolysis | | Biodegradability | | | heptan-2-one | - | | - | | Readily | |

Persistence and degradability

| Product/ingredient name | Aquatic half-life | | Photolysis | | Biodegradability | | 2,4,6-tris (dimethylaminomethyl)phenol | - | | - | | Not readily | |

Bioaccumulative potential

| Product/ingredient name | LogP_{ow} | BCF | Potential | | --- | --- | --- | --- | | benzyl alcohol | 0.87 | - | Low |

Bioaccumulative potential

Product/ingredient name | LogP_{ow} | BCF | Potential | | --- | --- | --- | --- | | Formaldehyde, polymer with benzenamine, hydrogenated | 2.68 | 209 to 219 | Low |

12.1 Toxicity

12.2 Persistence and degradability

Bioaccumulative potential

| Product/ingredient name | LogP_{ow} | BCF | Potential | | --- | --- | --- | --- | | 4-methylpentan-2-one | 1.9 | - | Low |

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

Bioaccumulative potential

| Product/ingredient name | LogP_{ow} | BCF | Potential | | --- | --- | --- | --- | | cyclohexanone | 0.86 | - | Low |

Bioaccumulative potential

Bioaccumulative potential | Product/ingredient name | LogP_{ow} | BCF | Potential | | --- | --- | --- | --- | | heptan-2-one | 2.26 | - | Low |

Bioaccumulative potential

| Product/ingredient name | LogP_{ow} | BCF | Potential | | --- | --- | --- | --- | | 2,4,6-tris (dimethylaminomethyl)phenol | 0.219 | - | Low |

Bioaccumulative potential

| Product/ingredient name | LogP_{ow} | BCF | Potential | | --- | --- | --- | --- | | benzyl dimethylamine | 1.98 | 14.13 | Low |

Bioaccumulative potential

| Product/ingredient name | LogP_{ow} | BCF | Potential | | --- | --- | --- | --- | | 3,6-diazaoctanethylenediamin salicylic acid | -1.66 to -1.4 | - | Low |

Bioaccumulative potential

Bioaccumulative potential | Product/ingredient name | LogP_{ow} | BCF | Potential | | --- | --- | --- | --- | | 4,4'-methylenebis (cyclohexylamine) | 2.21 to 2.26 | - | Low | | | 2.03 | - | Low |

Mobility in soil

Soil/water partition coefficient (Koc) : Not available.

Soil/water partition coefficient (Koc) is not available.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.

Disposal

Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1263
Shipping Name
PAINT
Transport Class
3
Packing Group
III
ADR

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IMDG

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IATA

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for EEAY051B ACTIVATOR COMPNT?

The signal word is danger.

What is the physical form of EEAY051B ACTIVATOR COMPNT?

EEAY051B ACTIVATOR COMPNT is a liquid. with colorless. color. It has not available. odor.

What is EEAY051B ACTIVATOR COMPNT used for?

Industrial applications. Coating.

What are the hazard statements for EEAY051B ACTIVATOR COMPNT?

This substance has 8 hazard statements:

  • H226: Flammable liquid and vapor.
  • H302 + H332: Harmful if swallowed or if inhaled.
  • H314: Causes severe skin burns and eye damage.
  • H317: May cause an allergic skin reaction.
  • H336: May cause drowsiness or dizziness.
  • H351: Suspected of causing cancer.
  • H361: Suspected of damaging fertility or the unborn child.
  • H372: May cause damage to organs through prolonged or repeated exposure. (kidneys)

What is the melting point of EEAY051B ACTIVATOR COMPNT?

The melting point is Not available. and the boiling point is 117.22 to 316.11°C (243 to 601°F).