Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Endo Cold Spray Mint / Orange
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Auxiliary for manufacture of dental prothesis
Manufacturers & Suppliers
Henry Schein Inc
manufacturer
135 Duryea Road Melville, NY 11747 USA
Henry Schein UK Holdings Ltd
distributor
Medcare House, Centurion Close Gillingham Business Park Gillingham, ME8 0SB U.K.
+44 (0) 1634878750
Emergency Contacts
Chemtrec US
(800) 424-9300
Mo-Fr 0-24 h
Chemtrec
001 703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethanol anhydrous, denatured with 3% Diethyl Ether EC: 200-578-6 | 64-17-5 | 2.5 - 10% | Yes |
| propaan vloeibar gemaakt EC: 200-827-9 | 74-98-6 | 50 - 100% | Yes |
| Butane (containing < 0.1 % butadiene (203-450-8)) EC: 203-448-7 | 106-97-8 | 25 - 50% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. As protection from splashes gloves made of the following materials are suitable: Butyl rubber, BR; Nitrile rubber, NBR; Natural rubber, NR.
Tightly sealed goggles
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Endo Cold Spray Mint / Orange?
The signal word is danger.
What is the solubility of Endo Cold Spray Mint / Orange?
Not miscible or difficult to mix.
What is Endo Cold Spray Mint / Orange used for?
Auxiliary for manufacture of dental prothesis
What are the hazard statements for Endo Cold Spray Mint / Orange?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
What is the melting point of Endo Cold Spray Mint / Orange?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..