Cooling spray Medicool

Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration. If unconscious place in recovery position and seek medical advice.

Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap. Do not use solvents or thinners.

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.

If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting. Observe risk of aspiration if vomiting occurs.

alcohol resistant foam, carbon dioxide, Powder, spray mist, (water)

strong water jet

Dense black smoke occurs during fire. Inhaling hazardous decomposing products can cause serious health damage.

Cool closed containers that are near the source of the fire.

Keep away from sources of ignition. Ventilate affected area. Do not breathe vapours.

Do not allow to enter into surface water or drains.

Clean using cleansing agents. Do not use solvents.

Materials: Ecodry

Avoid contact with skin, eyes and clothes. Do not inhale dusts, particulates and spray mist when using this preparation.

When using do not eat, drink, smoke, sniff.

Avoid formation of flammable and explosive vapour concentrations in the air and exceeding the exposure limit values. Only use the material in places where open light, fire and other flammable sources can be kept away. Keep away from heat sources, sparks and open flames. Use only spark proof tools.

Provide good ventilation. This can be achieved with local or room suction.

For prolonged or repeated handling the following glove material must be used: Thickness of the glove material > 0,4 mm; Breakthrough time (maximum wearing time) > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles EN ISO 374. Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.

Wear closely fitting protective glasses in case of splashes.

If concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Use only respiratory protection equipment with CE-symbol including four digit test number.

Wear suitable protective clothing. Anti-static clothing including shoes are recommended. Set out skin protection guidelines: Lanex, Danak, TH30.

Do not allow to enter into surface water or drains. See section 7. No additional measures necessary.

Stable when applying the recommended regulations for storage and handling. Further information on correct storage: refer to section 7.

No information available.

Keep away from strong acids, strong bases and strong oxidizing agents to avoid exothermic reactions.

Hazardous decomposition byproducts may form with exposure to high temperatures.

not applicable

Hazardous decomposition byproducts may form with exposure to high temperatures, e.g.: carbon dioxide, carbon monoxide, smoke, nitrogen oxides. Do not expose to temperatures exceeding 50 °C/122 °F. Danger of bursting container.

Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8

Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8

Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8