Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- APERLAN Poka-Yoke agent A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
for disinfecting flexible endoscopes in washer disinfector in combinaison with Aperlan Poka-Yoke agent B.
Manufacturers & Suppliers
LANCER
manufacturer
30 BD DE L'INDUSTRIE Z.I. DU PAHIN, F-31170 TOURNEFEUILLE
+33 (0)5 61 15 11 11
Emergency Contacts
Poison centre
+33 (0)5 61 49 33 33
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Acetic acid practic acid hydrogen peroxyde
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Acetic acid | --- | --- | No |
| péracétic acid | --- | --- | No |
| hydrogen peroxyde | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply to fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. Seek medical treatment
immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice
Rinse opened eye for several minutes under running water. Seek immediate medical advice
Do not induce vomiting, call for medical help immediately.
Immediate Medical Attention
Seek immediate medical advice
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Foam, Fire-extinguishing powder
Carbon dioxide, Reacts with strong alkali, Water with full jet
In case of fire, the following can be released: Oxygen
Firefighter Protection
Wear self-contained respiratory protective device, Wear fully protective suit, Acid resistant protective clothing
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people at a distance and stay on the windward side.
Do not allow to enter sewers/ surface or ground water.
Absorb liquid components with liquid-blinding material. Clean the affected area carefully, suitable cleaners are: Dilute with plenty water. Warm water and cleaning agent.
Materials: liquid-blinding material, water, cleaning agent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. Do not inhale gases / fumes / aerosols. Open and handle receptacle with care. The usual precautionary measures are to be adhered to when handling chemicals. Respect the general safety requirements for the use of chemical products. See section 8 for information on personal protection equipment.
Protect from heat and direct sunlight. Store in a cool place. Heat will increase pressure and may lead to the receptacle bursting. Do not seal receptacles gas-tight. Store only in the original receptacle. Do not refill residue into storage receptacles.
The usual precautionary measures are to be adhered to when handling chemicals.
Protect from heat and direct sunlight.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Eyes wash facility and security showers nearby
Acid resistant gloves, PVC gloves, Neoprene
Tightly sealed goggles, Face protection
Use suitable respiratory protective device when high concentrations are present
Acid resistant protective clothing, Boots, Neoprene
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable approximately until 30°C
Reacts with reducing agents, Reacts with alkali and metals, Aldehyde, hypochlorites
Reacts with reducing agents, Reacts with alkali and metals, Aldehyde, hypochlorites
Oxidizing substances, do not overheat
Oxidizing substances, reducing agents, alkali, metals, Aldehyde, hypochlorites
Oxyge
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be made according to official regulations
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3149
- Transport Class
- 5.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling according to EU guidelines (Directive 2001/58/EC). Symbols: C-CORROSIVE, O-OXIDIZING. Risk Phrases: R8, R34. Safety Phrases: S3/7, S14i, S36/37/39, S45.
Indice: B, Date: OCTOBER 2006, FIDE 014&
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for APERLAN Poka-Yoke agent A?
The signal word is danger.
What is the physical form of APERLAN Poka-Yoke agent A?
APERLAN Poka-Yoke agent A is a liquid appearing as clear, colourless solution in water with colourless color. It has pungent caracteristic odor.
What is the solubility of APERLAN Poka-Yoke agent A?
fully miscible
What is APERLAN Poka-Yoke agent A used for?
for disinfecting flexible endoscopes in washer disinfector in combinaison with Aperlan Poka-Yoke agent B.
What are the hazard statements for APERLAN Poka-Yoke agent A?
This substance has 2 hazard statements:
- H261: Contact with combustibles material may cause fire
- H314: Causes burns
What is the melting point of APERLAN Poka-Yoke agent A?
The melting point is < -26°C and the boiling point is 100°C.