Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aperlan Poka Yoke Agent B
- Chemical Name
- Aperlan Poka Yoke Agent B
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive – restricted to professional users
Manufacturers & Suppliers
GETINGE LANCER
30 Boulevard de l'Industrie – ZI Pahin Concerto, 31170 Tournefeuille - France
+33 (0)5 61 15 11 11
Emergency Contacts
Emergency Contact
+44 151 951 3317
Only available during office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the victim to fresh air and keep him calm.
Wash off immediately with plenty of water for at least 15 minutes.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Protect unharmed eye. Obtain medical attention.
Do NOT induce vomiting. Rinse mouth with water. Give small amounts of water to drink. Obtain medical attention.
Immediate Medical Attention
Obtain medical attention.
Medical Treatment
For specialist advice physicians should contact the Poisons Information Service.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet, Dry powder, Foam, Carbon dioxide (CO2)
High volume water jet.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Increased risk of slipping in the presence of leaked / spilled product. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin and eyes.
Avoid subsoil penetration.
Wipe up with absorbent material (e.g. cloth, fleece). Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Clean contaminated surface thoroughly. Flush with water.
Materials: cloth, fleece, sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Aperlan Poka-Yoke Agent B
UFI: RTG0-90TN-200W-JD1Y
Aperlan Poka-Yoke Agent A
UFI: DQG0-T047-S00E-V1FW
APERLAN Poka-Yoke agent A
---
Akepox 5010 Component A
UFI: AFNM-QHHN-8218-FWAD
Akepox 5010 Component B
UFI: N1AA-2R3V-FY04-TGPT
Product A
---
Special Release Agent
---
BONDING AGENT 51066
UFI: 3AWC-R019-G00T-ST98
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle and open container with care. Never return unused material to storage receptacle. No special protective measures against fire required. Keep away from food and drink. Take off all contaminated clothing immediately.
Store at room temperature in the original container. Keep away from heat. Keep away from direct sunlight. Store in cool place. Do not keep the container sealed. Store in upright position only. Recommended storage temperature: 5 - 30°C. Keep away from food and drink.
Keep away from food and drink. Take off all contaminated clothing immediately.
No special protective measures against fire required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that eyewash stations and safety showers are close to the workstation location.
Splash protection: disposable nitrile rubber gloves e.g. Dermatril (layer thickness: 0,11 mm) made by KCL or gloves from other manufacturers offering the same protection. Prolonged contact: Nitrile rubber gloves e.g. Camatril (>480 Min., layer thickness: 0,40 mm) or butyl rubber gloves e.g. Butoject (>480 Min., layer thickness: 0,70 mm) made by KCL or gloves from other manufacturers offering the same protection.
Tightly fitting safety goggles / Face-shield
Choose body protection according to the amount and concentration of the dangerous substance at the work place. Wear as appropriate: Chemical resistant apron Boots
Avoid subsoil penetration.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No dangerous reaction known under conditions of normal use.
reaction with acids Gives off hydrogen by reaction with metals.
Protect from frost, heat and sunlight.
Possible incompatibility with alkali sensitive materials.
In the event of fire, the breakdown reaction causes the emission of carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of the product according to the defined EWC (Euro-pean Waste Code) No. Dispose of as hazardous waste in compliance with local and national regulations
Dispose of the product according to the defined EWC (Euro-pean Waste Code) No. Dispose of as hazardous waste in compliance with local and national regulations
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1814
- Shipping Name
- POTASSIUM HYDROXIDE, SOLUTION
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aperlan Poka Yoke Agent B?
The signal word is danger.
What is the physical form of Aperlan Poka Yoke Agent B?
Aperlan Poka Yoke Agent B is a liquid appearing as liquid with yellow color. It has odourless odor.
What is Aperlan Poka Yoke Agent B used for?
Additive – restricted to professional users
What are the hazard statements for Aperlan Poka Yoke Agent B?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage
What is the melting point of Aperlan Poka Yoke Agent B?
The melting point is < -5 °C and the boiling point is ca. 100 °C.