NextSDS Logo
Safety Data Sheet EN

neodisher Septo Plus

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
neodisher Septo Plus

Regulatory Identifiers

CAS Number
N/A

Identified Uses

disinfectants, Washing and cleaning products (including solvent based products)

Manufacturers & Suppliers

Chemische Fabrik Dr. Weigert GmbH & Co. KG logo

Chemische Fabrik Dr. Weigert GmbH & Co. KG

manufacturer

Mühlenhagen 85, D-20539 Hamburg

+49 40 789 60 0

www.drweigert.com

Emergency Contacts

GBK/ Infotrac

1 800 535 5053

GBK/ Infotrac

+1 352 323 3500

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS09 - Environmental hazard

GHS09

Hazard Statements

H314 Causes severe skin burns and eye damage.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
isotridecanol, ethoxylated 69011-36-5 1 - 10% Yes
fatty alcohols, alkoxylated 120313-48-6 1 - 10% Yes
N,N-didecyl-N-methyl-poly(oxyethyl)ammonium propionate EC: 619-057-3 94667-33-1 10 - 25% Yes
Ethanediol EC: 203-473-3 107-21-1 1 - 10% Yes
Propan-2-ol EC: 200-661-7 67-63-0 1 - 10% Yes
2-(2-Butoxyethoxy)ethanol EC: 203-961-6 112-34-5 1 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Ensure supply of fresh air. When spray fog inhaled, seek medical aid.

Skin contact

After contact with skin, wash immediately with plenty of water. Take medical treatment.

Eye contact

In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Summon a doctor immediately.

Ingestion

If swallowed, seek medical advice immediately and show this container or label. Rinse mouth thoroughly with water. Let plenty of water be drunk in small gulps. Do not induce vomiting.

Immediate Medical Attention

Summon a doctor immediately (for eye contact). Seek medical advice immediately (if swallowed). Seek medical aid (for inhalation). Take medical treatment (for skin contact). In the case of swallowing with subsequent vomiting, aspiration of the lungs can occur which can lead to chemical pneumonia or asphyxiation.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Chemical resistant gloves (EN 374). For permanent hand contact: neoprene (material thickness >= 0,65 mm, breakthrough time - 480 min), nitrile (material thickness >= 0,4 mm, breakthrough time - 480 min), butyl (material thickness >= 0,7 mm, breakthrough time - 480 min). For short-term hand contact: nitrile (material thickness >= 0,11 mm).

Eyes

Safety glasses with side protection shield (EN 166)

Respiratory

If workplace limits are exceeded, a respiratory protection approved for this particular job must be worn. Particle filter P2

Skin/Body

Clothing as usual in the chemical industry. Protective shoes

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Auto Ignition Temperature
not determined
Flammability
not determined
Appearance
---
Molecular Weight
---
Partition Coefficient
not determined
Solubility
not determined
Properties Status
---
Flash Point
54 C Method DIN EN 22719 / ISO 2719 Remarks Negative results are obtained in the sustained combustibility test (UN test L.2).
Vapor Density
not determined
Melting Point
not determined
Explosive Limits
---
Freezing Point
not determined
Density
1,00 g/cm Temperature 20 C
Relative Density
---
Decomposition Temperature
not determined
Relative Evaporation Rate
---
Cloud Point
---
Colour
---
Softening Point
---
State Under Standard Conditions
---
Solubility In Fat
---
Crystallisation Point
---
Solidification Point
---
Solubility In Water
miscible in all proportions
Colour Intensity
---
Upper Explosive Limit
not determined
Evaporation Rate
not determined
Lower Explosive Limit
not determined
Odor
---
Form
liquid
Odor Threshold
not determined
Physical State
---
Voc Content
---
Kinematic Viscosity
---
Metal Corrosion
---
Ph
appr. 6,5 Temperature 20 C
Bulk Density
---
Boiling Point
not determined
Dynamic Viscosity
---
Physical State Data
liquid
Vapor Pressure
not determined
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1903
Shipping Name
DISINFECTANT, LIQUID, CORROSIVE, N.O.S. (N,N didecyl-N-methylpoly(oxyethyl)ammonium propionate)
Transport Class
8
Packing Group
III
ADR

See Sections 6 to 8

IMDG

See Sections 6 to 8

IATA

See Sections 6 to 8

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for neodisher Septo Plus?

The signal word is danger.

What is the solubility of neodisher Septo Plus?

not determined

What is neodisher Septo Plus used for?

disinfectants, Washing and cleaning products (including solvent based products)

What are the hazard statements for neodisher Septo Plus?

This substance has 2 hazard statements:

  • H314: Causes severe skin burns and eye damage.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of neodisher Septo Plus?

The melting point is not determined and the boiling point is not determined.